Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / August 2008



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Name That Remote27 Aug 2008 03:25 GMT22
Does anyone know what brand of universal remote this is? Someone gave
it to me, and I do have a use for it, but need to know how to program
it.
http://i126.photobucket.com/albums/p96/bigelile/IM002448.jpg
CTC169 Dead Set HELP!!!26 Aug 2008 04:47 GMT6
I sure could use some assistance repairing the subject TV. I have replaced
the usual suspect caps, reg IC and the chopper transistor. I have 143v of B+
and the standby 5v and 15v (13.5v) supplys are working. I also replaced the
flyback. Before the set failed there was a lot of ...
Citronic Mixer Desk ... ?25 Aug 2008 23:03 GMT5
Good friend of mine is trying to get schematics for an old Citronic desk,
model SM450, but has had no luck tracking a copy down. Anyone got any ?
TIA
Arfa
Source for type TM RF coaxial connectors and adapters?25 Aug 2008 21:03 GMT3
I am looking for a source of type TM coax connectors and adapters.
Type TM is a miniature RF coax connector used way back in the sixties
on space programs. The connectors were originally manufactured by
General RF Fittings Division of Solitron Devices in Florida.
Philips 32PT563S w/ Horizontal Short Issue25 Aug 2008 18:10 GMT6
I am looking for help to find short that develops in the horizontal section
of a Philips 32PT563S37G (Chassis L01.1UAC-7638).
When the TV was first going out, it would be difficult to turn on.  It would
take several attempts at turning on to get it to stay on.  It started with
Grandata (UK) gone down the pan ?25 Aug 2008 08:24 GMT1
www.grandata.co.uk
As far as that magnificent collection of NOS ICs
Try anything old from their 2000 paper catalog, in the seach box, eg MC1391
or MC3302 and "There is no product that matches the search criteria"
Grundfo circulator pump25 Aug 2008 00:02 GMT4
A capacitor on my old wood boiler circulator is cracked and the thing
don't run. I went to Standard Electric and Bell pumps. Both said they
don't carry capacitors. It that a polite way to tell me to get f.cked,
I'm not a contractor? I can't believe they don't carry capacitors. Or
MYSTERY Compaq Laptop is "Alive" Again!!!24 Aug 2008 12:38 GMT1
  It's "alive" again (second time)!   After a few months of storage (RTC/CMOS
battery removed),  I hooked it up and it boots up!!!   This is the second time
this Compaq Presario 1200XL needed a long rest before coming back to
"life"!!!!   NOTE:  When it "dies",  it will not boot up ...
soundesign clock radio24 Aug 2008 03:55 GMT5
Does anyone know how to set the time on a Soundesign clock radio.  It is
model #7580ciy.  It has a telephone with it and a single cassette deck.  I
have pressed the set time button and then the hour button, (same with the
minute button) and the hour time will not change nor ...
Projection TV shadowing23 Aug 2008 21:51 GMT4
http://www.fixya.com/support/t950899-mitsubishi_wt_46807_blue_shadowing
Pics there as well.  Thanx.
Kenwood CJ66SS microwave oven, 200623 Aug 2008 14:34 GMT1
Owner put too heavy an item in the oven and the rotary drive made horrible
loud regular clatter noise after that, but cooker works still. On receiving
it was still making loud click noise of about 2 per second, very loud
disturbing noise. By the time I'd taken it all apart and ...
Restek amp ...23 Aug 2008 11:42 GMT3
Has anybody got schematics for, or direct experience of repair of Restek
model "Extract" high-end power amps ?
TIA
Arfa
Hypothetical toroidal transformer problem23 Aug 2008 07:49 GMT11
Unless anyone has experienced it. What would happen if that thick aluminium
sheet, nominally stuck as screening, to the chipboard interior of a band amp
carcass , drooped down and touched the top of the coachbolt that holds the
mains transformer to the chassis ?
Lamp Ballast Replacement on SONY RPTV LCD Televisions23 Aug 2008 03:44 GMT5
I have the KF-60WE610.  Bought in Dec 2003.  Replaced the first lamp
burn out on Aug 2007.  Has burned out again in only 1 year, probably
about 1,000 hours.  Replacement lamp does not have either OSRAM or
Philips markings, but is Made in Japan.  Lamp was replaced by circuit
Can't see dual monitor display23 Aug 2008 00:39 GMT2
I just bought an s video cable and hooked my Nvidia 6800 card to the
TV.
I was trying to get an output on my TV.  I didn't have any luck.
I set the second video display to primary and now I can't see anything
Pages: 1 2 3 4 5 6 7 8 July, 2008
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.