Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / April 2008



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
ACER 1916B LCD Monitor won't start when cold06 Apr 2008 17:51 GMT8
It seems this 19" LCD won't start up when it is cold. If you leave it
for a bit then it will eventually start up. The customer reported that
it had a swimming effect, but I did not see that happening. I did notice
that the backlight seemed to dim and brighten on it's own once in ...
Microwave Ovens06 Apr 2008 13:43 GMT4
After repairing a microwave oven should I plug it in and test it to make sure
everythings in working order before I reassemble it?
Under Counter Microwave Problem06 Apr 2008 03:46 GMT6
Ok folks, heres one for you!  I have a General Electric undercounter
(over my stove) microwave (#JVM1430WA01).  It has worked great for the
last 4 years... or should I say until the cooktop lights went out
(light inside microwave still works).  I thought at first it was the
Disposing of my old Microwave Oven?06 Apr 2008 03:31 GMT5
I bought a new microwave oven, so it's time to dispose of the old one.
It's a 2yr old Sanyo Super Showerwave.  It has a bad magnetron and
burned waveguide cover.  The magnetron is still under warranty, but I
didn't think it was worth the cost of labor to get the magnetron
RF modulator needs video to work?05 Apr 2008 23:13 GMT5
I read in comments about one RF-converter that it only converts audio
if there is video present.
Is this true of all RF-converters?
I guess I need to buy an RF modulator to take the audio and video from
Modem for cable and dial up on same pc?05 Apr 2008 22:40 GMT10
Now that we have a high speed cable connection we do not need dial up.
But it might be nice to have back up. I can add a dial up but will there
be conflicts? The cable modem is always on. Now I put ELNK on the new pc
and maybe I have a problem. I figure we'd only use the dial up if ...
WTB: Documentation for Hickok model 265 CRT tester05 Apr 2008 03:56 GMT1
I just bought a Hickok model 265 CRT tester/rejuvinator and it has no
docs with it. If anyone has any docs or info
about how to use this beast I would be most appreciative.
I found a guy in Ohio (Ray Nowak) who had one for sale on his webpage,
How To protect Virus from Computer04 Apr 2008 23:35 GMT8
Copy and Paste the Url given below :
http://www.tkqlhce.com/click-2863058-10437271
and Visit: http://www.anujbatta.blogspot.com
Rolex Watches,Cartier Watches,Panerai watch,Breitling,Chanel     Watches,Omega Watches,Rado Watches,Patek Philippe,IWC Watch,Tag Heuer     watch,Bvlgari Watches,Piaget, Audemars Piguet watch , Longines watches,     Montblanc, Louis Vuitton watches,Gucci watches,Hermes watches,Jaeger-lecoultre     watch wholesale in China.04 Apr 2008 23:33 GMT2
Rolex Watches,Cartier Watches,Panerai watch,Breitling,Chanel
Watches,Omega Watches,Rado Watches,Patek Philippe,IWC Watch,Tag Heuer
watch,Bvlgari Watches,Piaget, Audemars Piguet watch , Longines
watches, Montblanc, Louis Vuitton watches,Gucci watches,Hermes
Lead Generation Computer Systems04 Apr 2008 19:05 GMT2
Generate leads with new version of Spitfire X. Complete systems with
PC as low as $995. Predictive dialers at incredible wholesale prices.
Buy direct and save.
http://www.ogogosina.cn/Lead.htm
Yamaha R-9 Part / Schematic question04 Apr 2008 13:23 GMT1
I am having a problem identifying a couple diodes. They are marked
D514  & D516 (zener). The zener has an 01 or C1 on it. I have this
unit pretty much debbuged but could use some help identifying parts.
Also is the line fuse a 10amp slo-blo or fast acting ?  Thanks in
AKURA AP2821S TV fault - Blurry picture03 Apr 2008 22:36 GMT1
I have got a problem with an AKURA AP2821S TV. The problem is that it
seems to have lost its focus. This does not appear to be a problem
with signal reception as the picture from a VCR connected by SCART is
also blurry as are the setup menus.
Pin Cusion Distortion on old RCA TV03 Apr 2008 20:47 GMT1
I have a 15 year old RCA F27120WN that has just developed what I think is
called "pincushion" distortion. The entire picture is filled in, but
vertical lines near the sides are bowed inward. (Horizontal lines are fine.)
Any particular circuit or component I can check? Other than ...
Onkyo Carousel DVD transport not working03 Apr 2008 19:17 GMT18
Is there an FAQ showing how to check belts etc on this please?  Or is a cog
not tight enough or engaging properly?
I have a DV-CP702 which is about ten months old and has played about 4  or 5
discs in total!  Looking at the transport I can see the DVD being picked up,
Attention Mr N Cook ...03 Apr 2008 08:58 GMT1
A couple of months back, you were kind enough to scan and e-mail me a
section of schematic for an old Technics SU-V8. It has now come back with
another problem which, needless to say, is not covered by that section of
schematic. If it's not too much trouble, I wonder if I might ...
Pages: 1 2 3 4 5 6 7 8 9 March, 2008
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.