| Thread | Last Post | Replies |
|
| Magnavox CCU091 - have manual | 12 Dec 2007 17:30 GMT | 2 |
I have found the manual (5822) for the Magnavox CCU091, but now can't find your question, please repost.
|
| Octave Bass sound "shape" | 12 Dec 2007 15:01 GMT | 2 |
Sound colouration setting on Roland Cube 30 Would anyone know if this is how the output looks, on an oscilloscope, for a regular sine shape waveform from a signal generator as an input http://home.graffiti.net/diverse:graffiti.net/obm.jpg
|
| Mini LCD TV backlight problem | 12 Dec 2007 14:43 GMT | 2 |
I have a Casio 2.5" pocket TV and a 5" portable LCD TV. Both of these have the similar problem. I cant seem to adjust the backlight to an appropriate setting. I tried adjusting the brightness knob on the TV, but it either goes too dark or too bright. When i set it to an
|
| Refrigerator getting warming then fixes itself. | 12 Dec 2007 09:03 GMT | 9 |
For the last week our refrigerator/freezer was getting successively warmer each day. I looked on line and thought it may be the defrost timer/thermostat. I open up the back panel (side-by-side Frigidaire )
|
| Christmas Light Puzzler - HELP | 12 Dec 2007 02:58 GMT | 22 |
I have a pre-lit, 12', 5-year old Christmas tree with about 2500 lights. Entire sections (levels of branches, if you will) will not light. You can imagine what it's like to search and replace burnt bulbs. The bulbs are of the "shunt type" of course, but still, no lights. I have ...
|
| hw-32-a | 12 Dec 2007 00:22 GMT | 2 |
would anyone have a schematic for a heathkit hw-32-a... need the value of an rf coke by the final ..thanks Dave
|
| DVDR990 - TZA1032 | 11 Dec 2007 21:32 GMT | 13 |
I purchase DVDR990 Philips recorder. DVD laser is probably a bit used - is a problem with DVD reading (DVD writing and CD reading is ok). Recorder statistics: Number of times Tray went Open/Closed : 607
|
| Magnavox (Philips) TV model 27MS3404/17 ch L01.1U AC-7638 won't stay "on" | 11 Dec 2007 20:33 GMT | 2 |
I have a Magnavox (Philips) TV model 27MS3404/17 ch L01.1U AC-7638 (mfg 08/04) in my shop. The TV will turn on with picture and sound, but anywhere from a few seconds to a couple minutes, the horizontal sweep shuts down, which looks like the TV turned off, but the SMPS is ...
|
| Roland Cube distortion | 11 Dec 2007 18:50 GMT | 2 |
On "octave bass" setting only , which of course is the one used. A sort of auto-wah effect at the flanger rate but with the effects controls turned to off position. Alternate peaks of a 200 Hz input signal are attenuated.
|
| Web Results 1 - 100 of about 21,900,000 for watch online television for free. (0.48 seconds) | 11 Dec 2007 16:49 GMT | 3 |
Web Results 1 - 100 of about 21,900,000 for watch online television for free. (0.48 seconds) Beeline TV - Watch TV Online - Free Internet TV Channels Beeline TV provides a selection of the best broadband internet TV
|
| plasma tv kill audio on cordless head set ! NIDANSAN | 11 Dec 2007 06:21 GMT | 5 |
This new sony wireless head set works great on my 32 sony in my bedroom,connected to`` audio out ``low level on the tv, it feeds a base station tha modulate to a carrier frequency 2.5 mghz .The problem is in front of my panasonic plasma at a12 feet distant a loud interferance ...
|
| Mitsubishi WD52525 or WD52725 module removal | 10 Dec 2007 23:31 GMT | 5 |
I'm trying to remove the DM module from a Mitsubishi DLP, model WD52725, and I'm stuck. I removed the back cover and the rear plate. I removed the four screws that secure the electrical chassis, and I can move the chassis back a
|
| Plasma TV repair tips? | 10 Dec 2007 21:17 GMT | 2 |
I have a 42" HP PE4240N 42V6 set that was damaged in a power outage. The screen displays (with cable channel input) colored vertical lines with no controlled horizontal lines or differentiation. Basically is like there is no synchronoous horizontal addressing - if I set it for
|
| Tek 2235 no scan | 10 Dec 2007 21:09 GMT | 2 |
subject just about says it all ,,,wih I had kept my old one. I get 2 dots and a 1" line connecting them nothing else,,help very much appreciated. Regards,
|
| Buzz on Audio Pot Travel Denon PMA-520 | 10 Dec 2007 16:43 GMT | 7 |
I'm getting a barely discernable "buzz" between the 10 and 12 o'clock positions on the volume pot of my Denon PMA-520 integrated amp. I cleaned with Deoxit, no change. Does this indicate there is a bad spot on the pot, or could it be something else? The pot has the
|