Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / September 2007



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Old Zenith safety caps.28 Sep 2007 15:45 GMT8
I remember replacing these quite often many years ago and I still have
a few around here. They are pn. 22-7505, .015uf/1600V. These have four
leads. The two ends read continuity so as we'll probably never again
see the chassis these went into can they be used simply as a .015uf
Old RCA semiconductors28 Sep 2007 15:38 GMT2
I was cleaning up the shop and I found a box with the following RCA
parts:
146303, Comm Thyristor
146302, Trace Thyristor
Help needed for transistor cross reference28 Sep 2007 14:46 GMT8
I am trying to locate an NPN transistor #2SD1835. I did an NTE cross
reference and no luck. I have other components I need to order and am
trying to keep from ordering from more than one supplier to avoid
additional shipping charges. I usually order from Mouser who always
SONY VHS VCR SLV-SE730 NICAM DROPPING OUT28 Sep 2007 14:21 GMT3
My last-ever VCR is a Sony SLV-SE730 and wouldn't you know it, just as
I am about to transfer my last VHS's to DVD, the Nicam starts dropping
out. Otherwise the VCR is in fine condition.
Symptom: most of the time the audio plays as mono, but occasionally
Service Manuals And Instant Cures28 Sep 2007 14:17 GMT1
http://fletchersite.com
Problem with IBM T21 notebook on-topic here?28 Sep 2007 09:01 GMT4
I don't know if it's okay to ask here for help with the repair of a
notebook. Therefore please don't hesitate to tell me the right ng.
The T21 notebook (2647-67G, 20 GB, 512 MB) will sometimes not boot up
after status bar reaches 80% on Win2K boot screen (latest SP). The
Kenwood KR-V7020 acts strange & blows fuse28 Sep 2007 02:20 GMT1
I'm not a repairman, but do attempt the easy ones.  I like this receiver,
but suddenly it does weird things.
With power applied, a relay inside is clicking on/off about 4/sec.  The
On-Off PB is not stuck (checked the small sw inside).  Got that far into it.
Tec 2445 Start up 'bright spot' ?? beam set , hot or cold ?27 Sep 2007 23:15 GMT2
Have I a problem or is this normal ??
On power up , there is a short period of nothing , followed by the
front panel -center lights short flash- then trigger lamps ligth and
reamin lit , scope then runs normally ... I think this is normal
A new profession27 Sep 2007 23:06 GMT5
I know some who frequent this group have moved away from brownwares
(TVs specifically) and I am looking for a bit of advice.
I am getting sick of fighting the TV manufacturers. It doesn't light
my shorts anymore. I am sick of the whole thing.
about mac plus27 Sep 2007 20:16 GMT1
i baught an old APPLE - MAC PLUS computer . i pluged it to 230 v ac .
nothing happened .
so i opened the cover . i saw the fuse inside it had burst . so i
changed a onw 5 amp fuse . and i powdered it ON . i saw spark of fire
VHS-C to VHS27 Sep 2007 19:55 GMT6
I was given some VHS Compact Videocasettes (from a friends camcorder).
They nolonger have the camcorder and would like me to save the videos to
DVD.
I know you get adaptors that enable you to play this tape in a normal vhs
HEWLETT PACKARD HP 331027 Sep 2007 14:58 GMT7
Hello to all,
it's first the time that I visit this forum;
I have a problem with signal generator them HEWLETT PACKARD HP3310B,
the resistance in series to the BNC of high output(current limitation)
Boss DD3-3B , digital delay pedal , 200327 Sep 2007 14:45 GMT3
More a question of what is normal with these. ?
Probably an elcap problem, repaired . Its out of the box so the normal
footswitch action is replaced for testing with just a wire touched to
ground.
Walkman cassette repair27 Sep 2007 13:54 GMT4
I have an old (1980's) Sony cassette walkman WM-FX43 that needs a new
drive belt. Does anyone know the exact length of this belt.  I
measured the one I removed and is about 7.5" circumference, but it
looks like it has stretched so I am not sure about the size.  Also, is
Cannot boot from Dos27 Sep 2007 01:48 GMT8
I just put together a 686 to transfer dos files from an ailing 486's
hard drives. I was intending to use interlink or laplnk to do this.
For the secons computer I found an old 1 gig (approx) hard drive with
windows 95 on it. I reformated it from a dos 6.2 disk I had and
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 August, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.