Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / June 2007



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
turns off after 5 seconds25 Jun 2007 17:43 GMT2
hi i have a yamaha stereo reciever i moved it to a differnt location
and hooked everything up and it will only turn on for about 5 seconds
then turn back off i unhooked everything and it still does it
Masuda 7" BW   TV Schematic25 Jun 2007 16:50 GMT2
Has anyone got one of these or a site I can download the schematic from.
I am trying to convert it to AV in.
Andrew
reading schematic - power source25 Jun 2007 15:07 GMT4
I have a schematic showing connections from a transformer to a circuit
board.  Each connection reads: "12.6VAC" followed by the connection id
(in this case "TP7" and TP8").  My question is: would the transformer
in this situation be called a 12.6VAC transformer, or would these
GE GSD2800 Dishwasher Leaking25 Jun 2007 13:38 GMT22
OK, it's microcomputer controlled, so does that qualify as electronics
repair even if the micro isn't the problem? :)
This unit is about 19 years old and now has started leaking mostly
or totally when it's draining.  The drain hose is in good condition
a question25 Jun 2007 11:13 GMT12
All right. I will preface this by giving a little background, as I was
called on the carpet for not doing before.
I would like to make a device called an onomatograph. What you do is
disassemble an old television and remove the horizontal deflection coil. Put
Need Obsolete UDN2993LB small quanity25 Jun 2007 07:43 GMT3
I am looking for a small quantiy (3) of the obsolete UDN2993LB or the
UDN2998 which I am told is a direct substitue. This also obsolete.
If impossible, then I will look into wiring a similar one to the
circuit even if it has a different pinout.
Laptop LCD repair. INVERTER bad...25 Jun 2007 00:19 GMT9
Inverter has been confirmed bad. I don't have any output from it.
What usualy go bad with them ? Transfo , caps ?
Is it a kind of switching power supply ?
Tks for you help
whirlpool washer24 Jun 2007 16:50 GMT4
i have an older whirlpool washer that has suddenly decided to agaitat
and drain at the same time.  any help would be appreciated in fixin
this
--
Norbit Logic24 Jun 2007 16:24 GMT6
I have an old old unit I am trying to fix. I need info on one of the
parts...
looks like a BIG DIL IC, I believe it is what is called "NORBIT"
The number on it is 4NOR60. Just need the pinout and fuctionality.
mitsubishi 52525 and over the air signal24 Jun 2007 16:20 GMT1
I am getting a message and a blue screen telling me that the channel
is not available however, when I unplug the tv and replug it in the
channels are all there including the HD local channels out of NY and
Philly. I know that it is bad for the bulb life doing this. I just
Philips 29PT5408/01 Chassis: L04E - Fault code24 Jun 2007 10:29 GMT10
Brand: Philips
Type: 28PT5408/01
Chassis: L04E
Symptoms: Set does power up normally picture seems to be normal but
Is there any alternative to Digikey for small orders?24 Jun 2007 09:43 GMT14
I love their selection but when you look at their minimum purchase $5
fee, you end up paying $12 extra for a small order when you consider
shipping.
Mouser is good but they have a lot of stuff, particularly capacitors
TV Philips 29PT540824 Jun 2007 01:21 GMT2
My TV start up with picture ok for one minute and shutting down
himself with power LED flashing.  I'm working without a service
manual.
All I checked seems to be OK. That TV is out of guarantee with few
Akai am u0423 Jun 2007 23:06 GMT1
Have searched but cannot find an owners manual online for Akai integrated
amp am u04.  Does anyone know if there is one?
Patt
lawn mower wiring23 Jun 2007 18:00 GMT5
Hello,I was wondering if you have a wiring diagram for a ford riding mower
model YT 16 early 80's. I'm blowing fuses and I can not get the PTO tp
engage. I know that the wireing is wrong and I don't know where it goes.
Please help. I need to cut my grass.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 May, 2007
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.