| Thread | Last Post | Replies |
|
| Dead IBM T860 9494-HBO LCD monitor | 13 Apr 2007 04:20 GMT | 3 |
Any repair tips for a totally dead IBM T860 9494-HBO LCD monitor? Does appear to be the power supply.
|
| GUIDE PLUS --- Who's in charge? | 12 Apr 2007 23:17 GMT | 2 |
I have two RCA TVs, for years, with Guide Plus. About two weeks ago, the Guide Plus on the 25" started to act flaky, not showing program detail. I went through the "99999" reset deal, etc. Then we had a black out for about 2 hours. Battery backups faded away.
|
| Zen Micro MP3 - Cold Solder On Headphone Jack | 12 Apr 2007 20:03 GMT | 5 |
Hi. I have a Zen Micro MP3 player that has developed a cold solder joint around the headphone jack (and possiblly also the USB jack). I have read in other forums that this cold solder problem is notorious for this particular player. The warranty is past due. The only
|
| Sony tech: I need your help! KV36FS320 dead | 12 Apr 2007 17:37 GMT | 4 |
This Sony KV36FS320 will not power up, just 9 flashes of the standby/timer LED, unless I press the power button while energizing the power relay manually, ie Q608 base drive for 1 second. Then the set will run and -everything- works until I turn it off again. All standby supplies ...
|
| More on the microwave oven saga | 12 Apr 2007 10:16 GMT | 4 |
Ran a little experiment on the GE microwave oven that has been vexing me per my postings here a few days ago. As you may recall this GE oven will perform flawlessly with its control panel tilted out at about a 45 degree angle, but shuts off after only a few seconds with the ...
|
| Anyone NEED these test jigs? | 12 Apr 2007 01:15 GMT | 21 |
I have the following items. Please bare with me being I have found very limited info. on these. I am assuming that if you are looking at this post then you are familiar with test jigs. Anyhow I have the following: Sharp Jig- QPWBF2382TAZZ w/ QPWBN2381TAZZ attached to it. I could ...
|
| Microwave schematic | 11 Apr 2007 23:53 GMT | 25 |
Folks, My searching on Google has come up empty. Do service manuals and schematics actually exist for a GE microwave oven JVM1650BH03? If so where might I acquire such material?
|
| iiyama 22" crt monitor | 11 Apr 2007 20:06 GMT | 4 |
I have an old pro502 monitor it has served me well for several years now, but recently the picture is too narrow about 50%, sometimes it is ok but then it wobbles and goes narrow ( horizontal ) I opened it up and blew lots of dust away, one capacitor seems far
|
| amplified speakers | 11 Apr 2007 19:49 GMT | 19 |
Good Day, I accidently wrecked my amplified speakers by reversing the polarity from the battery. It is a fairly inexpensive set from radio shack with a sub woofer and two small "towers" . I still get a very quiet
|
| Norcent LCD. | 11 Apr 2007 13:42 GMT | 2 |
Norcent Model # LT2722, has a grey raster, with no video, & on screen display is off horizontal, & can't be read. Can't change inputs. I'm in eastern Canada. Anyone have info, or parts? Not sure
|
| Help Identifying a Plug/socket | 11 Apr 2007 11:38 GMT | 15 |
I'm hoping someone can help me identify (and thus hopefully find a replacement for) a plug used inside an aged hi fi loudspeaker. Specifically, it is the plug that attaches the signal cable to the chassis of a Tannoy 15" Monitor Gold "dual concentric" driver
|
| VCR won't turn on after brownout | 11 Apr 2007 04:19 GMT | 8 |
We experienced a brownout last week, during which we hurried around the house and unplugged everything sensitive. Afterward, everything came back up fine except for a Panasonic PV- D4744S DVD/VCR combo. It refuses to turn on. I opened up the case to
|
| Sanyo DS26050 TV stuck in demo mode | 11 Apr 2007 00:41 GMT | 3 |
My oldest son (18 and brain dead) somehow put our TV into demo mode. All of the features and specifications of it constantly scroll from the top to the bottom of the screen. I cannot find how to get it out of this mode. I have seen dozens of posts about this problem where
|
| hi | 10 Apr 2007 21:53 GMT | 2 |
|
| Use the chassis of a TV set (without picture tube) as a video souce | 10 Apr 2007 19:42 GMT | 17 |
I have a 5 years old RCA tv that required a new picture tube just after de warranty had expired and the price for the installation of a new tube was ridiculous. It was a good lemon but it was a lemon. I would like to use the set as one more video source to drive an
|