Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / September 2006



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Sony 19" KV-1947RX17 Sep 2006 13:32 GMT1
The color is ok but sometimes when it is turned on the video does not always
come up for awhile and sometimes the video comes on and the sound does not.
This is all intermittent.
Every time you hear about a new AIDS case thank a homosexual for bringing this plague...........17 Sep 2006 12:56 GMT44
Taught in the Dentistry Colleges, this is a factual indication of the
homosexuals role in proliferating the AIDS virus to the heterosexual
population.
A quarter of a century of AIDS cases
Panasonic PT50LC14 IC1001 regulator blown apart17 Sep 2006 08:20 GMT2
The power supply is only available as a complete board and no schematic nor
parts list is included in the manual.  It looks like the regulator is a
STR-G66?? but I can't tell the last two digits.  I'd like to fix the PS to
see if anything else is wrong rather than buyng a whole ...
1993 Olds Cutlass Ciera Delco AM/FM/Cassette17 Sep 2006 07:00 GMT6
The cassette deck of my Delco model 16129923 AM/FM/Cassette deck play
way too fast.  Interestingly, last fall it played too slow, this yea
it plays too fast.  Also, the auto-reverse mechanism was not workin
properly (tape did not change direction when I pushed the button t
Affordable Electronics17 Sep 2006 05:32 GMT1
http://www.wraporkeep.com
apple 17" multisync17 Sep 2006 05:19 GMT2
The monitor would not come on and I could see and smell smoke coming from
the rear.  It must be a relay, resistor or something on the high voltage???
TV - Non Constant White Screen. Sound Works as does PIP.16 Sep 2006 23:10 GMT6
Ok so heres the deal
Early 90's Proscan TV.
About a week ago my TV started to display a solid white background with
no retrace lines. The sound works fine along with all menus and tv
Purpose of device???16 Sep 2006 16:06 GMT6
    I have a Zenith SR2568 TV that has a device near where the power cord
connects to the PWB.  It is thin (1/4"), and is something like 1 1/2h x
2 inches wide.  It appears to contain brass inside the plastic cover
with gaps of about 1/8 inch, each terminal connecting to line, ...
Sony KV20s42 TV sticky front buttons?16 Sep 2006 15:54 GMT2
I have  a Sony KV20s42 tv that has sticky buttons.
When i press + volume, the channel will go up(channel +). Both buttons
are next to each other.
I am pretty sure it is the buttons and i would like to take the board
Primary-secondary coupling capacitor in SMPS16 Sep 2006 15:06 GMT8
What is the function of the primary-secondary coupling capacitor (eg
http://tinyurl.com/ha435) in a SMPS? I ask this because I suspect it
may be the cause of a video "hum" issue.
I have a new DVD player that gets along just fine with my 34cm TV but
Revolution Is Here, Can You Taste The Victory?16 Sep 2006 14:19 GMT4
The Jews have taken the entire state of Israel, West Bank, and Gaza, all
of that is stolen territory. And they are the reason that someone else
would blow themselves up. It is not the Palestinians' fault. It is the
fault of the Zionists.
television overheated16 Sep 2006 09:15 GMT1
I think my television overheated because it was stuffed in a tight area
with no air circulation.... basically the power button has no effect on
it whatsoever.  It wont turn on. the TV is a 2000 sony  36" trinitron
kv-36fv16.  Is there any quick checks i can make for fuses or such?
Phillips TV power problem16 Sep 2006 02:59 GMT4
Hi, not sure if you can help me. I have a phillips widescreen tv, the
model number is 32PW9618/05. I sent it to a repair shop last year. They
said it couldn't be fixed and arranged to deliver it back to me. This
was over a year ago. When I recently called them to say I wanted my TV
HV troubleshooting after Splitter failure16 Sep 2006 01:05 GMT1
Hopefully somebody will be able to point me in the right direction.
It seems that after replacing the failed (shorting) HV Splitter/Focus
combo block something is still amiss in the set I'm repairing.
Are there any components (LXI PTV415) likely to have been damaged by
Mits VS-6080115 Sep 2006 20:40 GMT3
Hi;
No video. Menu and OSD fine. During menu time the PIP window is
distorted but shows something, out of sync with three vertical green
bars. Well at first of course I was thinking the PIP module, but I ran
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 August, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.