Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / February 2006



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Panasonic Monitor SL90 no green04 Feb 2006 18:19 GMT7
While using my computer I suddenly lost the green color on my
Panasonic SL90 monitor.  Can anyone suggest where to start checking,
or does anyone have a schematic for this monitor?
thanks
Radiators adversely affecting CRTs?04 Feb 2006 17:49 GMT8
OK so I've only just started to put this together..
About a year ago my TV (28" Sony Trinitron) started to lose picture
completely every 5-20 seconds when displaying bright images, so I
thought right, it's quite old (1997 ish?) so maybe it's just on the way
Walmart Lithiums below par04 Feb 2006 16:01 GMT6
Since I learn alot here, I thought I'd share my anectodal results here.
A few weeks ago I asked opinions about possible lithium battery failure
in my atomic watch. Having replaced it twice with NEW ones from Walmart
(labeled China), I thought it was reasonable to assume they'd be up ...
Centronics outdoor antenna motors04 Feb 2006 05:43 GMT1
has anyone been using these motors?   We are getting tired of the high
failure rate of the channel master brand.  hoping something else might
be more reliable.   We are in an area where we use large antennas
(winegard 7084 for example).   Would prefer using the remote models
Netgear "house wiring" Ethernet network04 Feb 2006 05:08 GMT11
I need to connect my wife's mac laptop to our cable Internet.  I have a
pc at the modem.  Maybe I'm a bit paranoid, but a wireless router
concerns me, even with encryption.  So I'm looking at these, a Netgear
product (belkin, others also make them) that basically turns your house ...
Yamaha DSP Amp has hum and low sound on one channel03 Feb 2006 23:50 GMT6
I have a Yamaha amplifier that's about 5 years old.  The right channel
is normal, but the left channel has a low hum and significantly reduced
sound volume/quality.
I've tried the following:
microwave oven Sharp R-650D03 Feb 2006 22:53 GMT5
This 2 year old oven failed last week.  ALL the appliances in my house
are dying - central vac, dryer, fridge, wall oven, microwave within 3
months.  Even my alarm clock is threatening to die.  The dryer, fridge
and oven are the same age, but the vac is much older, micro and ...
Mitsubishi CK35402 No Sound03 Feb 2006 22:35 GMT1
Hello all, I have a Mitsubishi CK35402 that has developed a no sound
situation. When I was given this set I had to do a PIP bypass to get
picture and then noticed that only one speaker was working normally
and the other had hardly any volume and was distorted. Now time has
Wanted Mitsubishi VS-5017S service manual03 Feb 2006 21:41 GMT1
Looking for the service manual for a Mitsubishi VS-5017S projection TV or if
sombody has it the board layout around the tuner section so I can repair
some burned traces.
Thanks,
Funny repeat problem with a 60 inch RCA PTK195AC (model P60812BL)03 Feb 2006 20:17 GMT16
This is a continuing saga of a 60 inch rear projection RCA TV.  It has
a chassis number of
PTK195AC and is model P60812BL.   I have now had a repair technician
over and it worked like a charm while he was here and for a couple of
AWA tv repaired - 3 times still not working right:(03 Feb 2006 19:04 GMT23
i've had to get my relatively new AWA tv model W571 repaired now 3
times and it's still not working right. $200 out of pocket and 10 days
with no tv:(((((( F***!
problem is perfect sound but no picture just a blue screen with white
dismantling optical scanners for parts?03 Feb 2006 17:56 GMT5
Anyone on this group have any experience with removing the sensing
array from scanners and using it as an optical sensor? I'm interested
in using some of the old scanners that seem to be all over the place as
optical devices for spectroscopy, etc. Problem is that I have no
Testing CPU's03 Feb 2006 16:52 GMT2
I have a Microprocesser and it has a program built into it.  I forget
the numbers, it is at the shop.  But is there a machine that can test
these things along with the many other Z80 or 68000 or 8088 etc.  I
know there is the Fluke thing but that sounds like a lot work tracking
==WHOLESALE TO THE PUBLIC==3500+ ITEMS==YOU MUST SEE03 Feb 2006 16:32 GMT1
==WHOLESALE TO THE PUBLIC==3500+ ITEMS==YOU MUST SEE
OVER 3500 ITEMS INSTOCK AND ALL BELOW WHOLESALE COST
TOP BRAND NAME ITEMS
NEVER PAY RETAIL AGAIN
Tektronix 465B Focus Problem03 Feb 2006 16:04 GMT3
The traces on my 465B scope are bright but a bit out of focus...I have
heard of resistor problems in the focus control voltage divider in
other models that have caused this same problem. I checked the CRT
schematic and noticed the resistors in question are in a resistor
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 January, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.