Electronics Forum / Repair / November 2005

The TV came with a remote that had on/off Sound u/d and Channel u/d.
After the remote died I have tried many universal remotes with no luck.
Anyone have a suggestion?

My niece spilled chocolate milk on her Sponge Bob video game and it later
quit working.  My investigation showed that the AA battery holder had
suffered some mild corrosion/oxidation thus effectively turning off the
little machine.  After a good cleaning all is well now.

cd plays for approx 20 sec then stops and cannot eject cd until power is
switched off and then switched on again any help me with this problem
paul

My PM 97 scopemeter from Fluke doesn't display any signal. Completl
dead.  A BUZ 11A is a little warm .
Do anybody know's where I can find a service manual for it?
Thank you

We sell device of Cellular Phone. and so.
You need device of other. Contact me.
We are trade company of semiconductor for Oversea Customer.
1. PMB2411 : 215,000 Pieces

TV is a 1995 (approx) GE 31"  model number F31700GG  (not sure what the
chasis # is)
Sympton =  no picture,  squiggly horizontal lines running across the
entire area of the tube with about 3-4" between each one.    In quick

I need your help, desperately.  I have an old VHS Sony SLV-R5UC.
Playback of a self-recorded tape has a purple tint on the bright
portions of the picture.  Playback of a pre-recorded tape is OK.
If you were to simply record color bars, or any other test pattern, you

I've had my 27" LCD TV for about 6 months now and I am already
experiencing a picture problem.  Granted, it's not a Sharp or Sony, so
I guess that serves me right.  The TV is Norcent - but I've heard good
things about them from a friend that has had one for a while.  I guess

I have a Johnson Red submersible water pump (model unknown)
240v 60Hz with two sensors (probably water level and heat).
There is 3 wires to the motor windings, start and two run. I have tried
using a contactor (controlled by pressure switch) to no success.  The

Just had a 32inch standard (not LCD/Plasma) Toshiba widescreen delivered
this weekend. All seemed fine, but I switched it on this morning, and after
watching it for a bit, I noticed 3 dead pixels.
How common is this? Are there likely to be more die? To be honest, they're

     I have two Sharper Image Ionic Breeze units.  These worked good
when they worked.  One broke about a year after I bought it, the second
broke just recently.  Actually, they both seem to be making high
voltage, but now neither are moving air.  I suspect the rectifier

I have a panasonic in for repair. You have to push the power button
several times in order the get the relay to click. When it does I hear
a high pitch from the power supply and then nothing. I get no HV from
the flyback even for a second> I hooked up my HV probe and get no

I have recently been given a Beckhoff Model CP6003-1002 Industrial 18" LCD
monitor that is in non-working condition.  I believe that this unit was
actually manufactured by TopVision as that's whose name is on the controller
boards inside the unit.  It appears to have a power supply ...

I have an old (13 year) B&O ME6000 television. When stereo is on, and
people hare talking, the "s"-sounds are scratchy.. When I turn into
MONO-sound the sound is perfect.
I have been told that the problem lies in the Nicam Decoder being

I purchased a Mits CS-20201 a few years ago for my mother who is in a care
center.  Apparently, one of the aides "misplaced" the owner's manual - as
in probably threw it out with the trash.  
Do you have a copy of the owner's manual or know where I could download