Electronics Forum / Repair / July 2005

20" Goldstar tv model:CN-20B90,chassis:NC-4JA,year:Sept 1995,CSA File
no:LR80622.I need the part # for R811=180 ohm,25w (ceramic stand up) as
I could use these on the tv's listed below:
To know why I need one you can read below:

DOES  ANYBODY OUT THER  HAVE THE  FIRST 1998 FIXFINDER DISC I HAVE LOST
MY  WHEN  MY OLD HARDDRIVE CRASHED UP AND CANNOT RECOVER IT ALSO I
CANNOT
FIND  MY DISC. I HAVE ALOT OF RCA COLOR  TVS  VCR  DVD ARE THE DISC BUT

What would cause a computer to not boot after power outage, until the
computer sits for 2 days afterwards.  Just leave it sit for 2 days after
a power outage and then it boots and run fine.

Hi Guys...
Hey, happy, happy, happy. :)
Got it; works like a charm.  Well, not me actually -
couldn't find the 26v test point; little one was looking

Anyone know a good place on the internet to get the little belts for the
laser pickup rail on a Carver DTL 50?
I'm going to try Carver service, also.
But any ideas would be greatly appreciated.

I'm looking for help with my 8060a. I have 2 problems.
1. After power-on I get a "- OV". Normally an "OV" means that you are
out of range...I never see a "-" sign there. I cannot make any
measurements.

Can I get recomendations for the most accurate electronic timer that I
can buy?
It must to be accurate to within 1/60th of a second over the course of
6 hours.

I am in need of a cross reference for d825, (r2kl), ?

Hello all, I acquired a Toshiba CF27E50 tv that seems to have a problem
with the vertical. The picture is squashed about 2 inches below the top
of the screen.
I ordered the schematics and service info from Sams and checked all the

www.dayga.co.uk now stocks radioshack products in the UK , amongst other
produts which may be of interest to this group such as inverters,
stepdown transformers etc
the RadioShack inventory currently covers switches, relays, bulbs and

While servicing a Simpson 1699 precision millivolt meter I found an Eveready
W-353 BAttery.Its a 1.5 volt Battery that's about 1 1/4 X 2 1/4X 4 inches
I 've searched the web and cannot find any mention of it which has me
curious as to why such a devise would be used versus a ...

I have a Hitachi 55" project TV (model 55FX48B) that just dies yesterday
while watching a DVD.  Essentially, the power just quit and none of the
front panel buttons respond, nor on the remote.
I have already opened up the unit and checked inside.  None of the usual

Hey guys,
I have an arcade machine which inside has 4 speakers and a subwoofer.
Durring the moving of the machine, the subwoofer broke loose along with
its wires and I cant exactly figure out where it hooked into. Can

this monitor started to develop vertical lines down the middle of the
screen and sometimes everything is scrunched up in the middle as well.
After some reading, i understand that this could be a problem of dry
joints. I have taken the back off the monitor but i couldnt figure out

I have a sanyo model ds27800 that has no vertical
deflection. When I turned it on it popped and then
had a straight line across the screen. Was wondering if any one had
experienced the same problem and if so could guide me to the cause.. I have