Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / July 2005



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
JVC R-X500 receiver tip and question             alt. ref: R-X500B  RX500 RX500B R 500 R 500B10 Jul 2005 10:53 GMT1
Tip;
Look for damage wherever glue was used.
This set had the wires in a couple of ribbon cables
eaten away where they were glued to the PCB's
mitsubishi television repair10 Jul 2005 06:21 GMT3
I have a Mitsubishi VS-60803 CRT Rear Projection HDTV unit.  It has this
problem where when it powers on, the green power light flashes on, then
shuts off half a second later.  No image appears on the screen.  There are
also four evenly spaced clicking sounds: the first two coincide ...
Mitsubishi TV   CS-3506   What is proper B+ voltage ?            alt. ref:  CS-3506R CS3506 CS 3506 CS3506R CS 3506R10 Jul 2005 06:12 GMT1
I just fixed this Mitsu CS-3506 in a trade deal with
a friend of mine. Crikey after replacing every
Nichicon black cap with a " + "  stamped into the
top of the can and also hours of reworking electrolyte
amp distortion10 Jul 2005 06:06 GMT5
KENWOOOD KA-31 Amplifier
the left channel on this amp sounds distorted at lower volume and cuts
out at med to high volume.
i tried swapping the speakers but its definitely the amp
Need to enter in Samsung VCR memory10 Jul 2005 05:20 GMT1
I`ve a vcr Samsung sv-651x and it turns crazy (it doesn´t work) I need to
enter memory to restore the codes, but dont know how to... i
think that is somethink like hold the DUB button and then other but i dont
know...
Panasonic PV-D4744S video level adjustment10 Jul 2005 05:10 GMT2
I have a Panasonic PV-D4744S  VCR/DVD player combo, no service manual.  Can
anyone tell me if this unit has an internal video level adjustment?  The video,
as taken from any of the rear panel video connections, appears darker than
normal.  
Sony TA-AX2 amplifier10 Jul 2005 03:37 GMT1
Does anyone possess a user or service manual or schematic of the subj.?
Thanks,
 Max
Hitachi Service Manuals10 Jul 2005 00:26 GMT3
http://fletchersite.com/ht1.html
newbie question on probing transformerless ac power supplies with an isolation transformer09 Jul 2005 23:09 GMT2
This is a general question about the use of isolation transformers for
probing ac powered circuits.  The circuit in question is from the
following application note:
http://ww1.microchip.com/downloads/en/AppNotes/00954A.pdf
Orion TV STV2763 "Dead"09 Jul 2005 21:19 GMT3
 I have an Orion TV model STV2763 (mfg 11/02) in my shop
that is "dead".   No blown fuse or shorted H.O.T.  I checked
the loads on the Reg outputs and found no shorts.  I scoped
the reg B+ line and plugged in the TV.  The B+ would "shoot"
ASK A TECH09 Jul 2005 19:42 GMT2
HAVING PROBLEMS WITH ELECTRONICS DEVICES?
Visit http://fletchersite.com
These guys are great!
Solartron 7061 Service Manual?09 Jul 2005 19:18 GMT1
This one has me stumped.  Nobody but nobody seems to have a Solartron
7061 service manual.  The company itself doesnt have one they say.
There's a user's manual, which is helpful, but not for tuning them up.
I have two of these nice voltmeters... it sure would be nice to have a
Help Please Harmon Kardon AVR630 Surround Amp Power problem09 Jul 2005 13:16 GMT2
My harmon kardon AVR630 surround amp had developed a fault. The unit
got very hot and the fan came on for the first time ever. ( ive had
the amp for over a year )
After unpluging it and leaving it to cool down it will now power on
Sony camcorder switch on and imidiatly goes off!09 Jul 2005 11:53 GMT3
I have an old camcorder, Sony Video 8 model CCD-TR45E.
Most of the time, I use it as a camera, not as a recorder. Sinse some
time, I have a strange effect. When the button is shifted to 'player',
the tape can be played and can be seen in the viewfinder, no problem.
VM-E530A - Flashes TAPE in VF09 Jul 2005 11:32 GMT1
Hi, I'm looking for someone to help me with a VM-E530A.  If you insert
a tape, it loads fine, it ejects fine.  The cylinder motor or the
capstan motor does not start.  The tape is in the cassette just sitting
in the basket.  TAPE flashes in the VF.  Any help is greatly
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 June, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.