Electronics Forum / Repair / July 2005

Hi guys!before anything else,i want to introduce myself,my name is
michael,and i'am here to share some link that maybe able to help you in
your work,i'am talking about this link,
http://www.tpub.com/content/neets/

Am looking for the part number for this ancient pinch roller, or a
cross referece to other models which used the same deck/roller so i can
widen my search (I think Pye UK did one machine with that deck). Have
checked Donberg for the pinch roller vr6462 but they don't seem to have

A friend of mine gave me this TV, and while it has a great picture, for
the life of me, I can't figure out how to hook up a VCR or DVD player
to it.  It has inputs on the back of it, but when I hook up my DVD
player to it, I can't get anything to appear on the screen other than

I would like to have the operating manual of Philips PM 3262. Couldn't
find it on the web. Can someone point me to a copy if available
somewhere?
Thanks

This set will not turn on - no video, audio, fan. It makes a clicking
sound continously from the area of the HV. Before the set stopped
working the same clicking sound could be heard when the TV was
operating.

Sound just died one day. Receiver turns on and seems to function okay.
If I turn up the receiver all the way and find an FM station I can
barely hear the station. Everything else gives me nothing. I replaced
the glass fuse where the power cord connects. I heard their may be an

I have an electric dryer that is about 7 years old. I'm a beginner and
no nothing about repairs or problems, but I did a little research
online.
Here is the problem:

As strange as it may sound, I have a similar problem with my cell phone and
my laptop. I tried to trouble-shoot and isolate the problem(s). Here's what
I found: bending the printed circuits a bit switches the devices from
working to non-working modes, but wiggling any connectors or ...

I have a problem with my JVC GR-SXM540 S-VHS-C camcorder.Playback of any
recording on the camera itself gives a fuzzy picture. If  I record something
with the camera and play it back on a VCR the picture is fine. The camera
has only been used a few times but is past warranty. ...

My tape recorder stops functioning occasionally, i.e. it does not
eject, play, rewind or forward, until I open the bottom cover and
rotate the main pulley which drives the big pulley.
Also I can not get the tape status indicator any more.  Can anybody

Anybody know where I can get a schematic / service manual for a CZ32V51
TAC9910?
All I have is a power on light.
Thanks

We are finsihing up a new construction home, and have a Viking
Microwave on a 20 amp circuit in the kitchen. This is the only device
on the circuit. The microwave cooks fine, but sometimes just closing
the door on the microwave trips the breaker! I have moved the oven to

Hi all, I have a set in for "shut down" with LED flashing.  Quickly
traced to the "protect" pulling up on shutdown.  Tried convergence
power disconnected and tv fired up.  Bingo.  Unsoldered both
STK392-110 IC so I can make sure the convgerence generator module

I don't have much experience with regards to computer monitor repair etc,
and I was hoping somebody could help me.
I have a Sony GDM-F520 monitor that has been functioning fantastically for
approximately 2 years.  I am now in my 3rd year, and when I first turn the