Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / January 2005



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Decent cell phone headset & plug adaptation questions21 Jan 2005 01:53 GMT4
I have a Siemens A56i cell phone for which I would like to get a
headset.  Unfortunately, the phone has a bizarre proprietary plug, not
the "universal" 2.5mm kind, and the only headsets available with the
plug are those miserable in the ear "earbud" kind, which in my
Ferguson TX100 chassis T.V21 Jan 2005 01:07 GMT1
Where should I start LOPT?  I have checked all the usual things.  How d
you check a damaged capacitor with a multimeter with no capacito
tester?
John Hutchison Wrote:
PC diagnostic software21 Jan 2005 00:51 GMT8
Is there any good PC diagnostic software for troubleshooting potential
hardware/software conflicts? I've only heard of bug doctor. Thanks. Mark.
Digital Camera for Workbench20 Jan 2005 22:07 GMT12
Can anyone recommend an inexpensive but not junk digital flash camera with
macros capability that would be good for photographing detailed sections of
a radio chassis or any other electronic equipment?  I'd use it to document
disassembly, for photo attachments to show which elusive ...
Toshiba 2173DB sound probs20 Jan 2005 21:39 GMT1
I recently leaned on my tv remote, while adjusting sound at the set, an
ever since then I have no sound from my tv, I have tried re-tuning, an
my pictures are perfect, but I still have no sound. When this happened
there was a two digit number that was moving in the top hand corner o
Tek 465M as/usm Oscilloscope Problem20 Jan 2005 18:58 GMT6
Hello all,I have built a octopus/huntron tester for checking component.The
problem is after about 15 minutes I loose my x-horz trace.It starts to
flicker and then turns into dot only.When I wiggle the volts div. knob on
the upper left of the scope it trys to come back.The vert.trace ...
Hitachi TV power problem20 Jan 2005 17:04 GMT3
Have a Hitachi 50" model #50EX10B, chassis AP32. I don't have the
schematic, but the set intermittently won't power up. Push power
button, and hear the relay energize, red light on panel comes on, then
light goes out. Set won't power up. Measured correct B+ up to switching
Sanyo AVM2502... snow20 Jan 2005 14:36 GMT6
I picked up this Sanyo AVM2502 which is around 21" out of a pile of
junk, I figured it was junk and that's why it was there, anyway. When
I got it home and plugged it in I surprised to find out that it
worked! the only problem is that every channel is snow...
Panasonic New  lamp TEEC0024-1 WANTED20 Jan 2005 11:46 GMT1
I'm interested to buy a new replacement lamp for Panasonic PT52DL10 par
#TEEC0024-1, I can pay $350, so if you have one for sale or you kno
where I can get it for this price or less :) please email me a
agpjt@yahoo.com
Looking for data formate for Rate Proms for pitney bowes postal scale20 Jan 2005 06:48 GMT13
I bought a Pitney Bowes A510 digital scale on Ebay originally just to
use it for weighing shipments to calculate by hand what the postage
should be (goes up to 10 pounds in 0.1oz increments).
However this scale has a built in price calculator - it'll show what
washing machine motor20 Jan 2005 06:48 GMT2
the washer stopped spinning so i removed the belt and tried it again an
motor would not spin so i helped it along by turning the pully and i
ran so i figured it was the capacitor bought a new one that had
different mfd reading.the original was 233-280 mfd 110vac and the ne
Computer for power supply?20 Jan 2005 04:29 GMT12
Can I use an old computer for a power supply for my mobile 2 meter 50
watt radio? Will the radio put out the same power as if it was in the
car? It calls for 13.8 volts.
12VDC Power Supply outputting 19V?20 Jan 2005 03:45 GMT21
I have a Nippon America DVP-3212 power supply that I fear has had an
encounter with a power surge.  Now instead of 13.8VDC it is putting out
20.4V.  Checked it with the 'scope and it is still smooth and ripple free
but the voltage fine adjust pot has no effect.  It looks like the ...
recomendations on TVs20 Jan 2005 03:22 GMT29
What would you guys recomend as a good TV. From a servicing point of view
and from a longevity angle. What are your thoughts on Ferguson?, Just
spotted them in a shop, didnt know they were still on the go.
Im looking for a large screen TV, something like a 32" that is 4:3. or
Ample Audio ? ample problems20 Jan 2005 03:15 GMT2
 This is the 2nd Ample Audio A 1100 DX  car amp
I've gotten in for service this month with a "ghostly" protect
problem.
Get this;  Amp instantly goes into protection upon power up.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.