Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / November 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Sony ICF-7600D stereo?25 Nov 2004 04:48 GMT2
I'm wondering whether it is possible to convert the Sony ICF-7600D radio to receive and play stereo FM broadcasts.
If any of you know whether this is possible, please let me know here on this newsgroup.
Thanks!
How does a 3-way pickup selector work?25 Nov 2004 00:28 GMT3
I was wondering if someone can explain how a 3-way pickup selector (or
toggle switch) work on a electric guitar (with 2 humbucker pickups)? Are
there any web sites explaining with diagrams how they work?
I wanted a way of comparing to see if my 3-way toggle switch was working
RCA Model 2503524 Nov 2004 23:37 GMT2
Hi. I have an RCA Model 25035 TV with sound but no picture. Any help
would be appreciated. Mark.
ctc185ab24 Nov 2004 23:25 GMT1
set came in dead...Q4114 was shorted...replace with kit 231523,set now
power up and stays on for about minute then shuts down.relay clicks
twice.any suggestion will be greatly appreciated
Adjust COnvergence on Viewsonic P815 CRT?24 Nov 2004 22:36 GMT2
So my wife and I both have Viewsonic P815 21" CRT monitors.  We've had them
for a number of years.  They are both getting farther and farther out of
convergence.  The screen is out of convergence in different areas of the
screen so adjusting the convergence with the OSD just ...
Can switch cleaner damage pots?24 Nov 2004 22:05 GMT4
I just picked up a used guitar amplifier. One of the pots was a little bit
noisy, so I opened it up and sprayed all of the pots with DeoxIt D5 contact
cleaner. When I tried out the amp afterwards, all of the pots were quite
noisy. Much worse than before I cleaned them.
Remote Control Rechargable Flourcent Light24 Nov 2004 20:16 GMT2
Dear Sir,
I have a rechargable flourcent 18w light that can be set on and off
both manually and by remote control. The light containing a 6V,4.5Ah
acid recargable battrey. The light can be setted on by the remote
Whirlpool ice maker 24 Nov 2004 13:56 GMT7
does anybody have any advice on problems with those modular Icemakers
put in Freezers ?
My icemaker stopped making ice and I believe the heater is not turning
on to allow the maker to move the ice out.  Any suggestions ??
100th Anniversary24 Nov 2004 12:04 GMT3
100TH ANNIVERSARY OF ELECTRONICS.
Researchers are marking November 16, 2004 as the 100th birthday of
electronics, which began with British scientist John Ambrose Fleming's
1904 invention of the first practical electronic device. Known as the
Help troubleshooting: Sony STR-D31524 Nov 2004 11:58 GMT3
I have a somewhat old Sony STR-D315. The left speaker/headphone
output is sending highly intermittent signals, causing a crackling
sound in both the speaker and headphone.
Is there a particular component I can change out to fix this, or
RCA 5 disc CD mini stereo model:RP-9588A24 Nov 2004 11:54 GMT1
RCA 5 disc CD mini stereo model:RP-9588A,year:Aug 1998.I need the part
# for the CD tray rotate belt and CD tray load/eject belt as all of
the PRB Belt Co paperback catalogs go as late as early 1998 and the
sites below don't say that no repair parts are available.Thanks in
NMH Batteries Storage24 Nov 2004 11:30 GMT1
   I have a box of NMH batteries.  Is there any harm in
storing these in a "run down" (uncharged) state?
               Thanks in advance,   Brad
 Before you type your password, credit card number, etc.,
Help with electric guitar pots problems? 24 Nov 2004 10:26 GMT17
The guitar has two volumes, two tone dials and one three-way toggle switch.
The toggle switch and dials look like the ones on this guitar:
http://www.albinhagstrom.se/hagstrom_h_ii_n.htm
The volume on my guitar cuts off after I go below 5 on the bottom volume
rc car24 Nov 2004 07:33 GMT8
My sons RC truck stopped working. Batteries good. How can I determine
if the transmitter, or receiver is malfunctioning? Motors are good.
Operates on 27mhz. Thanks for any help.
Attaching fiberglass to the walls of a speaker enclosure24 Nov 2004 05:15 GMT6
Not really a repair issue, but I'll bet someone here has an idea on
this.  I have a couple MDF cabinets which will each house 1 10" woofer &
1 10" passive radiator as subs. I have some of that white "softer" owens
corning fiberglass insulation that comes in a pink plastic cover ...
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.