Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / August 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
medion MD3795VT28 Aug 2004 23:18 GMT1
hello NG,
in my Medion TV picture doesn't disappear whne switched to standby.
Could help me anybody?
thenks
Looking for Laser assy Philips VAU 1252/10 (CDM 12 Pro?) for Electrocompaniet cd player28 Aug 2004 19:06 GMT1
Does anyone know where I can buy one online? I have exhausted my
google search.
Thanks
Adrian
Dell P780, Sony Chassis D99 No G2 voltage.28 Aug 2004 18:29 GMT2
Please see 112Kb binary file in sci.electronics.schematics if you need
to see part of the schematic.
Here is what I have, several of the P780 monitors with no G2 voltage.
Following all the way back to IC001 the G2 output control pin has only
The sound leads the picture on my TV for this olympic games.28 Aug 2004 16:33 GMT2
Dear commerades, I have noticed something on my TV in the ongoing
Olympic games. The sound leads the picture by some seconds, can I have
some explanation?
Also in the boxing contest I see some small box strapped to the back
Power Supply Resistor28 Aug 2004 13:45 GMT3
Have a question that has made my wonder for some time , no real need to know
but someone must have an answer, how can one put a 5 Watt resistor in series
with the power transistor emitter that can develop 690 watts at 50 amp. and
have it survive , seems like the numbers are not ...
Compaq monitor V5028 Aug 2004 12:26 GMT1
I have a monitor compaq V50 which has the following issue.
The focus of the screen has constantly to be trimmed with the trimmer
of the high voltage trafo. It means there is a drift. Does anybody have
a idea where it can come from ? I don't have any scheme of it. A
Camcorder Dropped: Repair Possible?28 Aug 2004 10:55 GMT7
I have a Sony camcorder that is about 3 years old. The camcorder
hit some concrete quite heavily after I fell while still holding the
camcorder. A Sony Service Center gave me an estimate of
several hundred dollars to repair the camcorder, but said the
conputer turn on problem28 Aug 2004 04:14 GMT12
Hey all;
My computer is argumentatve about booting. Sometimes it fires right up,
other times I have to turn the switch off at the back and push the power
button over and over to get it to boot. The weird thing is, it always turns
Servicemode Philips 28pw6006/0128 Aug 2004 03:30 GMT2
I have no servicemanual available overhere.
Can anybody tell how to get into the servicemode?
Thanks
Jimmy
Sony KV-27EXR25 resistor values.28 Aug 2004 02:13 GMT2
Can anyone tell me the values for R673 and R656 on G board in Sony
Trinitron Model# Kv-27Exr25? Found strs6301 to be damaged ( recently
replaced by someone, but it looks like they tightened the retaining
screw to much and cracked the body), replacing with strs6301a along
Repairfaq traffic28 Aug 2004 00:10 GMT5
I have temporarily disabled the directories:
http://www.repairfaq.org/sam/
http://www.repairfaq.org/REPAIR/whole/
We are trying to figure out why the traffic stats are so high.
Phillips 27PS55 Problem27 Aug 2004 22:47 GMT1
OK, I know this board is for far more experienced techies than myself,
so if I should go somewhere else, please point me to the right
place...
I have a Phillips 27PS55 TV which was purchased a year and a half ago.
General monitor question: screen resolution relay?27 Aug 2004 20:47 GMT5
In all the VGA & SVGA monitors I've used there seems to be a relay
that clicks when the screen rate changes. I'm guessing that this is
just a relay that switches in/out some C to change a timing circuit
for the H or V sweep.
Sony KP-46V15 Convergence Fuse Grief & Drama27 Aug 2004 14:54 GMT3
Sony KP-46V15, has had intermittent blue haze overcome the screen
periodically - comes & goes - maybe part of my problem; otherwise
perfect picture – no shape, color or visible distortions of any
sort…..anyhoo  stopped working.
Advice?27 Aug 2004 14:52 GMT2
It's time for a new TV receiver!
I don't think a flat-panel is really
worth the prices just for the light
weight and ablilty to "hang it on a wall".
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 July, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.