Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / July 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
television malfuntion mystery05 Jul 2004 19:40 GMT5
I have an 8 or 9 year old Magnavox television that has a very
conditional problem.  During the daytime, the picture is great, but when
it is dark outside, not just dark inside, the picture gets interferance
in the top 1/3 of the screen, in the shape of a thick black line that is
Need Intrusion Alarm Schematics05 Jul 2004 18:54 GMT2
Our home is fitted with a 19 year old wired intrusion alarm which has
worked faultlessly since it was installed by a sub to the the general
contractor who built the place. The only service it's required has been
changing the backup gel cell every few years.
Newbie monitor question05 Jul 2004 18:15 GMT2
I've got a monitor with a faulty VGA cable (pic goes bluish, ok if you twist
the cable slightly). I'm wondering:
1. How hard, dangerous, etc is it to replace a monitor cable? I'm figuring
it can't be more than a couple of solder points and knowing which wire
Sylvania TV model 6427CTA05 Jul 2004 15:12 GMT1
Hi can some one please help me out, I need values for R574 and R575 for
a sylvania TV model 6427CTA mfg in 2000 there is no chassis number only
a circuit bd with the production number BL1200F01012-1 I have looked on
manuals4U.com with out results a web search would indicate tat ...
TV Set Lost Sound05 Jul 2004 14:41 GMT3
It used to be that the volume on my tv set would suddenly become quite
lower than normal. I usually would be able to correct it by gradually
increasing the setting until it reached a certain point (about 80%) and
then the correct volume would suddenly kick in and blast your eardrums ...
TV shutting off05 Jul 2004 14:36 GMT3
I've had a RCA model F26667 tv for about 3 years.  It worked fine
until about a week when it started shutting itself off and making a
loud cracking noise while doing so.  I took the back off and blew off
all the dust and it worked for about a half hour or so after that but
Repair Power Module for washing machine05 Jul 2004 13:11 GMT2
I have a Fisher & Paykel washing machine with Smart Drive (?) The main
motor power module has "spat the dummy". The fuse blew and two diodes
on the input bridge rectifier self destructed. No replacement modules
are available. Can anyone give me a clue as to the most likely cause?
Marantz CD67 MKII SE cd player problem05 Jul 2004 13:04 GMT1
I have a problem with my Marantz CD67 MKII SE cd player. When initially
turned on the cd player has trouble finding CD tracks, sometimes coming up
with No Disc. If a CD plays in the player, it does so, but is completely
drowned out by a crackling noise.
Pentax Zoom 105-R Camera: Help Needed !!!05 Jul 2004 07:38 GMT3
Hi there !!!
I hope not to be too much OT and sorry if I am. Anyway, I've got
the following problem with my Pentax "Zoom 105-R" camera.
While switching it on, the zoom mechanism moves towards the maximum focal length (105 mm)
foreign selectric type ball/element?05 Jul 2004 07:02 GMT1
I wish there were a newsgroup specific to typewriters, but this seems to be where most of
the relevant info is. Where can I find a selectric type element with foreign
(spanish/french) accents, punctuation?
Thanks for any help.
?05 Jul 2004 03:04 GMT2
Aint got no hillbillies here ?
Shucks .
Dead Emerson CT056505 Jul 2004 02:18 GMT1
Hello all...
This set is an Emerson portable color TV, yet oddly enough it doesn't run on
batteries. Owner says it played in fits and spurts and now it is dead on all
modes--none of the TV or radio functions work. There is a faint burnt smell
WTD: pioneer turntable exploded view05 Jul 2004 02:14 GMT1
I need an exploded mechanical view for a Centrex (Pioneer) model
RH-6161 turntable. Just need to find out where 2 loose springs go.
( Even a photo of the underside may help)
Please REMOVE the "NS" from my email to reply. Thanks.
is it a remote set?05 Jul 2004 01:57 GMT5
What do I look for in a visual inspection of a TV to know if it has remote
control capability  (absence of a flipper may not mean the set doesn't have
remote capability).
Tough dog: P52923 PTK195 turn on is too high contrast then gradually clears up.04 Jul 2004 21:55 GMT2
Got this RCA projector with this.
Not the typical CRT short or open heater problem.  No retraces.  Tuner
working properly.
It looked like picture is very faint, normal overall brightness but
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 June, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.