Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Repair / July 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
sears/sanyo c539-14949 tv menu problems06 Jul 2004 22:07 GMT1
I have a sears/sanyo c539-14949 tv,  c539-50775 that i got from a dump.  It has no manual or remote for it.  The problem I am having is regarding the on screen menu system, I cannot change the other settings (tint, contrast etc) besides colour.  I tried the on tv controls with no ...
Heil Ohmega 400 Parts06 Jul 2004 20:51 GMT2
I need replacement output and output driver transistors for a Heil Ohmega
400 power amp (1970's).
The company no longer has stock, but I spoke with Bob Heil, and he said he
has seen discussions on this amp in  this NG.  The part #s are proprietary,
I found a Giant screen06 Jul 2004 19:18 GMT2
The other night I walked a friend out to her car and there sitting next to my
car was an older giant screen RCA projection TV. I live next to an Apt.
building and I assume someone moved and left it. I stood there for 15 minutes
talking to my friend, at 8:00 pm  I asked her if she ...
Replacing igniter on gas stove sealed burner?06 Jul 2004 18:55 GMT1
I posted this on alt.home repair and got no feplies for the last few days,
just reposted it.  Figured it is electrical in nature and that some of you
might know the answer since most people here are into fixing stuff.
I have a Whirlpool gas freestanding range with sealed burners
S&M Story (humour)06 Jul 2004 17:46 GMT2
Just found this clean electronics related joke in a humour area:
S&M Story
My girlfriend always seemed to enjoy seeing how much she could get away
with doing some form of bondage stuff in public. She does this partly
Its Dead06 Jul 2004 17:17 GMT7
I just put my phasor on stun to heat up some cheese on rice crackers and
there were fireworks , and my phasor was charred and smoking . I will have
to have Spock look at it after he gets done repairing the antimatter printer
. Does anyone know how to open a phasor ?
TDS 420 Oscilloscope06 Jul 2004 14:59 GMT14
I have an opportunity to buy a TDS420 oscilloscope.
What is your opinion of this scope?
Are options and repairs available for it yet?
Where would you buy accessories for it?
Sansui VRDVD4000 power supply repair06 Jul 2004 14:49 GMT2
THe system took a power surge and of course no surge protector. So how
do I diagnose the power supply? What do I check?
Yoke buzz06 Jul 2004 13:13 GMT2
I have a Siemens 68cm TV using a CUC1825 type chassis.
The yoke is coated with a brown epoxy and I don't understand why it should sing.
But it does.The tube does not use rings and I think it was a philips tube.
When the volume is low,the buzz is very annoying.
Is 130Deg F on the heatsink too hot for a HiFi amp ?06 Jul 2004 08:09 GMT5
I've got a "better" Sony receiver/amp that's working fine.
I recently connected the audio from a PC sound card to the AUX input
ond it sounds great. I've been listening to Internet Radio and my MP3s
but I've noticed that for what seems to be the same listening level
AIWA cd tray removal howto (NSX-V70)06 Jul 2004 04:17 GMT2
A while back I wrote on how to remove the cd tray from my AIWA NSX-V70
stereo.
It was suggested that I remove the lip from the front of the tray and then
slide the tray back into the stereo and lift out. Having finally had time
RCA P52750wk projection TV06 Jul 2004 04:13 GMT2
Has anyone seen my RCA P52750wk projection TV? I left it outside my
apartment building at about 8:00 pm the other night. I was only gone
about 15 minutes to answer nature's call, but when I returned some
miserable bugger had stolen it. The TV is about 10 years old, and the
Seeking AC  Adaptor for Infocus Model 2600 LCD Panel06 Jul 2004 00:45 GMT1
Anyone know where I can find an AC Adapter for an old Infocus Model
2600 LCD panel projector? I contacted the original manufacturers of
the adaptors who are in CA. But they want $150 for one. I purchased
the projector on e-Bay for $50, so I don't want o pay more for the
HP jornada spareparts?05 Jul 2004 22:34 GMT4
Hi..
Where can i find spareparts for my HP jornada computer?
I need the fluorescent lamp that's in the display.
Now i have a red light from it, and probably that will be black
Awai NSX-3500: CD player doesn't recognize CD05 Jul 2004 21:55 GMT8
Picked up an Awai NSX-3500 at a yard sale for $5.00 because the lady
said CD player doesn't work. So I though, not bad if I can fix it.
After taking it apart and checking on the internet, it seems Awai had
quite a few lawsuits due to their CD player's being faulty and not
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 June, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.