General - Repair

Thread preview

Thread	Last Post	Replies

RCA 61 inch read projector.	30 May 2004 04:19 GMT	2
just thought i would drop a note here. i just bought a 61 " HD Tv from RCA , one of those new models RCA has thats listed for around something like $4299 or what ever.
SONY XBR Code E10B	30 May 2004 03:48 GMT	2
A friend of mine is complaining his TV is out of focus and has an "E10B" error code.He also states that when he applies the "Auto Focus" or "Magic Focus" option his video quality returns to its normal, viewable state for "A split second"then degrades immediately.
Philips TV-set Matchline 6720 distorted picture, no sound	30 May 2004 02:31 GMT	2
I'm hoping someone can help me get this Philips Matchline 6720 TV that was given to me, back to work again. It still had sharp and crisp picturequality, both from the tuner and from the 2 external Scart-sources, all TV-channels were available and
Help, HP E3611A DC Power Supply, No Output ??	30 May 2004 01:00 GMT	1
I have an HP 3611A Power supply which is a 0-20V 0-1.5A DC Supply with a read LED readout for both voltage & current. The unit powers up but the readouts are reading something close to 0 and both the Constant Voltage / Current indicators are light.
Looking for Info,data,full P#	29 May 2004 22:49 GMT	1
I am looking for Info or full part number on SMT SOT-23 packaging with Device marking R2FU. The R2FU that I have , is totally shorted. Any help would be greatly appreciated.
PC111 optocoupler	29 May 2004 21:35 GMT	2
What would be a good cross for the Sharp PC111 optocoupler? Can i use a CNX83a, they seem pincompatible. Thanks, Marc
UK source for Toshiba 2SC5587 Transistor?	29 May 2004 15:00 GMT	2
Tried Maplin, Farnell, RS and others but can't find a source for this transistor - It's the Horizontal Output Transistor for a ADI Microtron 19" monitor - any ideas - thanks Specs here
Unlit LCD in NAD receiver	29 May 2004 12:31 GMT	4
Encouraged by the helpful responses to my TV question, here is another. I have a NAD 703 receiver. It is nearly 10 years old but still works well and sounds good except for one small point. The backlight for
Toshiba CZ36V51 Drops Sound	29 May 2004 12:09 GMT	3
The set has a great picture, but the sound level keeps dropping low. It can usually be recovered by switching to another channel, then back again. Sometimes you must power off and on again. The problem seems worse when the set is warming up, then seems to stablize until turned
How to repair my penis-enlargement machine?	29 May 2004 11:30 GMT	1
Doesn't work anymore, now it will shrink the penis to the size of an atom. How can I repair it? and how can I repair my willy?
Samsung DVD-V1000 schematics?	29 May 2004 10:14 GMT	1
Looking for schematics for a Samsung DVD-V1000.
SMD identification	29 May 2004 08:01 GMT	1
I have a SMD from an industrial machine made in Italy that I'm having problems identifying. It's green, has 2 legs, and is marked 221k. I was thinking 220 ohm resistor, but it only measures 10 ohms. Any ideas?
Bose Lifestyle 25 Parts	29 May 2004 06:51 GMT	4
I've got one of these from a repeat customer; I do mostly TV repairs, so my parts sources (Tritronics, MCM, Suburban) don't carry Bose parts. Where can I get the power transformer that sits in the subwoofer module? TIA
Viewsonic PS790 G2 Voltage Measurement	29 May 2004 04:18 GMT	2
I have a Viewsonic PS790 monitor with no raster. HV is a solid 25KV, and the CRT filament lights up. G2 screen voltage is supposed to be 600v, but I measure about 130v at start up, and within a few seconds it's down to about 75v... same results with socket removed from CRT. I ...
JVC HRS7500U problems...	29 May 2004 02:44 GMT	4
Guess I'm the latest victim of what seems to be a less than stellar machine (JVC HRS7500U SVHS VCR). Couple of days ago, I found that the unit would constantly shut down either upon inserting a tape or just turning the machine on (comes on for a few seconds then goes back off). No ...