| Thread | Last Post | Replies |
|
| lcd inverter pin layout | 10 May 2004 06:30 GMT | 3 |
i'd like to know what is the pin layout of the compaq presario 1800 battery, it's a 5 pins socket, the spare part number is 176778-001. Thanks!
|
| NTLDR MISSING | 10 May 2004 03:05 GMT | 6 |
working on this packer bell computer, trying to load windows but ever time i try it tell me that NTLD missing would like to know what gooing? thanks in advance
|
| Toshiba 32" Telvision | 10 May 2004 01:32 GMT | 2 |
I have a 32" Toshiba telivision model 3CF3272B that displays thin white vertical lines across the top 6" of the screen. Imediately under those lines are 3 thin colored lines that change coler and blink. The whole picture blinks occasionally, other than that it is working fine.
|
| Compound for anode cups | 10 May 2004 01:18 GMT | 4 |
What is the compound for CRT anode cups?
 Signature Z Remove all Zeds in e-mail address to reply.
|
| Zenith SRV1300S replacement remote | 09 May 2004 22:47 GMT | 3 |
Someone PLEASE HELP ME!!! I have a 13 inch Zenith SRV1300S TV/VCR Combo that my mother gave me years ago for graduation. In a recent move, the remote was lost, IMAGINE THAT!!! I have looked all over the net and can't find an original replacement. If anyone can help me, I would ...
|
| logic analyzer cables | 09 May 2004 21:53 GMT | 1 |
i'm looking for the cables for a 7d01 logic analyzer module for the 7603 from tektronix. Thanks!
|
| Where to look for microwave oven fault? | 09 May 2004 15:13 GMT | 15 |
Greetings All, My microwave oven just quit heating. Before I scrap it for parts maybe I can instead fix it. When set to defrost the power cycles on and off. And you can tell by the lower fan sound and the light slightly dimming
|
| Panasonic MX-6 chassis | 09 May 2004 11:24 GMT | 1 |
Hi does someone know how to get into the service mode with the Panasonic MX-6 chassis A EEPROM was replaced and the width is right in, so we need to set it. Thanks From Peter
|
| Microwave oven trouble. | 09 May 2004 10:04 GMT | 2 |
I accidently left a can in my Microwave oven (it wont happen again). After turning it on, I noticed sparking and immediately turned it off, total time on was about three seconds (plus one). It seems to work fine, no visible damage. Replacing the thing is an option. Is there any ...
|
| USB ports on Dell Optiplex GX1 | 09 May 2004 08:58 GMT | 2 |
I have a second user Dell Optiplex GX1 machine. The USB ports used to be fine, but then one of them became physically damaged, possibly generating shorts between pins and/or case when cable was attempted to be plugged in to it. Now neither of the USB ports will work.
|
| Tip for Toshiba TV verical repair | 09 May 2004 08:49 GMT | 7 |
I inherited a Toshiba model CF2750K, chassis# TAC 9011, with the notorious vertical problem...compressed to center and upper half...bottom half dark. After reading some of the posted hints, I arbitrarily replaced the 1uf-50v capcitor in the verical section. It seemed to be the only ...
|
| '91 Curtis mathis dark cable TV Picture | 09 May 2004 05:02 GMT | 6 |
1991 Curtis Mathes TV. Model: GT2760 Service: cmj2765w Very Dark TV picture, on screen display looks good. Any ideas where to start
|
| Zenith Model SM3583BT 35" TV Audio Problem | 09 May 2004 04:11 GMT | 1 |
Have a Zenith Model SM3583BT 35" TV with gray and distorted video. Determined that the tv had a defective IF Block (Part # 9-1320). After replacing the block, the video was restored. However
|
| source for old power cord | 09 May 2004 02:14 GMT | 5 |
I'm looking for a power cord for an old super-8 projector. This model had a removable cord, which is missing. There are two posts in a rectangular recess. I need a plug with a basic 2 blade household plug on one end, and a rectangular
|
| Zenith TV/VCR SRV1300S dead | 09 May 2004 02:10 GMT | 1 |
a friend of mine gave me this TV if i could fix it, so i went ahead and got it. I try to power it on, the tv will cycle for a sec and shut off. I checked the HOT, and it tests fine.
|