| Thread | Last Post | Replies |
|
| HP Vectra Pentium II -- Flaky caps? | 01 May 2004 00:27 GMT | 11 |
Hello all... I have an HP Vectra VL Pentium II with 300MHz CPU. While this system is generally reliable and well behaved with Windows 2000 Pro SP4, there are times when it randomly drops into a STOP error or applications start acting
|
| the wonderful world of old washer machines | 01 May 2004 00:16 GMT | 6 |
hi :) the sensor in the door of my old washer machine just broke. do you think I could join two of the cables so it believes that the door is always closed?
|
| Sony TV Audio Problem | 30 Apr 2004 21:39 GMT | 1 |
Folks, I have a 6 years old Sony KVJ25MN21, and started experiencing audio problems with it. It started last week when the TV is turned on, the video is fine but do not
|
| 5600uf 63v Caps? | 30 Apr 2004 17:36 GMT | 5 |
Anybody know where to get some 5600 63v caps? I need to replace some in an audio amp that I have.. Thanks -Mike Kennedy
|
| GE phone beep sound-batteries need replacing? | 30 Apr 2004 17:13 GMT | 1 |
I get a constant beep sound,like a warning from a used GE display speaker phone,model 2-9375G, is this just warning batteries need replacing? cant find anything on web
|
| Ayuda sobre un monitor lg 520si | 30 Apr 2004 17:00 GMT | 1 |
Hola, necesito por favor si alguien me puede facilitar el codigo del integrado IC 901 del monitor LG 520si CA-47. Si alguien tiene el diagrama electronico lo agradeceria tambien el que tengo exploto y no se puede leer el codigo. Muchas gracias.
|
| Expro 80 | 30 Apr 2004 16:52 GMT | 5 |
do someone have an schematic for an expro80 epromprogramer? thank, michael
|
| Tek 465 oscilloscope | 30 Apr 2004 07:34 GMT | 3 |
Tektronix 100 Mhz dual channel oscilloscope model:Tek 465,year:1972 one day channel 1 trace disappeared but when you press beam finder button the trace is on the top of the crt and while holding the beam finder button in and moving the channel 1 vertical position pot up &
|
| Hamfest schedule web site | 30 Apr 2004 07:32 GMT | 2 |
Is there anyone know any web sites that post Hamfest Schedules?
|
| TFT monitor info | 30 Apr 2004 06:05 GMT | 3 |
I've been trawling the net for info on TFT monitors - can't find any! - loads on CRT's though. Does anyone know of any TFT info on the net? Also how can I tell if the screen of a TFT monitor is dodgy as opposed to
|
| need info on BT815 | 30 Apr 2004 04:10 GMT | 1 |
anybody got any info on this device which is propably a thyristor or triac. Its from a motor speed control circuit.(OLD) Have done google etc but no luck. Allan
|
| need service code number for siemens tv | 30 Apr 2004 03:53 GMT | 1 |
tv is FS-275 M6 Its got cs9304 written on sticker as well Possibly Grundig CUC1852 or CUC1882 I need a suitable 3 digit number
|
| RCA Rear projection P52921YX2 Need Part # | 30 Apr 2004 00:22 GMT | 1 |
Does anyone know the RCA part number for the mainboard chassis of this set it is an CTC/PTK-195MB, My board is unrepairable and the only number I can find on the board is 1538350F. I called RCA part specialist but they need a part number.
|
| Radius PrecisionView 21 Monitor - Red convergence problem | 30 Apr 2004 00:15 GMT | 2 |
Blue and Green are perfect. No ghosting or convergence issues Red Horizontal lines are perfect. No Vertical ghosting or distortion. Red Vertical lines have perfect vertical line but faded red ghosting to right side. Red vertical lines are clearly visible. Red ghosting is
|
| Portable 1" vtr manual needed | 29 Apr 2004 23:55 GMT | 4 |
I need the ops/service manual for either a Sony BVH-500 or RCA TH-50A (which Sony made...they are the same unit, different name plate) portable 1" vtr (circa late '70's). I also need the same for a Concord B/W 1/2" R/R vtr #vtr-820 (early '70's). Please
|