| Thread | Last Post | Replies |
|
| Sanyo TV Reliability | 31 Jul 2003 22:26 GMT | 1 |
I need to buy a new 27 inch tv. Consumer's Reports says that Sanyo tv's are among the most reliable sets. Anyone have strong feelings on the subject, pro or con? h. r. hofmann
|
| barco data 400 CRT projector?!? | 31 Jul 2003 22:13 GMT | 1 |
im lookin for info/shematics/manual on this CRT data projector. it reports sync-error? any ideas? K
|
| VCR: Siemens FM628 | 31 Jul 2003 21:31 GMT | 1 |
How to set time and date without remote control ? even possible ? MH
|
| RCA PTK/CTC169PEB dead | 31 Jul 2003 19:33 GMT | 2 |
I have one of these sets, and ive had it for a quite a few years now. It worked great until over a year ago, and the raster kept going in and out intermittently, HV was always there. the video signal was there, and teh screen drive was absent. so I went to
|
| What to clean copier OPC drum? Harden soft rubber? | 31 Jul 2003 19:02 GMT | 2 |
I have a Canon PC25 photocopy machine I'd like to patch up. The rubber roller in the paper path has turned to mush. I cleaned it off and replaced the rubber part with a stack of O-rings.
|
| ahhhh | 31 Jul 2003 17:24 GMT | 3 |
wht the hells up with the server? my posts arnt available????
|
| KV-M2531U Frame Collapse | 31 Jul 2003 17:03 GMT | 3 |
I have a Sony KV-M2531U that has a collapsed frame - single line across middle of screen. The vertical delflection circuit is based around a TDA8170 that has been replaced but it still will not work. Supply voltages seem OK and components
|
| Sony CRX160E Problem. | 31 Jul 2003 09:52 GMT | 2 |
I have a sony CRX160E. When booting up after memory check, and hang at IDE checking (can't found the CD-RW device). The CD-RW door can open and close itself, but i done nothing. Sometime BIOS and OS can't detect the device. Sometime it operate itself and hang, i can't open
|
| Samsung SM-308 CD-RW/DVD combo drive for computer....SPINDLE MOTOR problem... | 31 Jul 2003 06:12 GMT | 2 |
After poring through the Sci Elec Rep Faq, I think the problem with my Samsung drive (internal, Dell 8100 desktop computer) is the spindle motor. It needs a nudge to get the cd spinning, though the spindle platter seems to spin freely by hand.**
|
| SHARP 25AV79 VERTICAL COLLAPSE | 31 Jul 2003 03:26 GMT | 2 |
Hello I have a Sharp TV 25AV79 with a vertical collapse problem. Any ideas on a specific fix for this unit? It would be greatly appreciated. Thanks,
|
| When is my TV going to die? | 31 Jul 2003 02:55 GMT | 4 |
I have a 10-year old Mitsubishi TV that I paid nearly $1,000 for. Two years after I bought it, something went wrong (I forget what..) and the repairman fixed it for $180. Now, eight years later, it is acting up. When I first turn it on, horizontal lines form at the top quarter of ...
|
| I collect pictures of big dicks | 31 Jul 2003 02:03 GMT | 1 |
So if you are at least 10 inches and you have a digital camera then please whip it out, take a picture, and e-mail it to me.
|
| (req) | 30 Jul 2003 21:56 GMT | 1 |
i am looking for the "softjig" software from samsung to fix a HP/Samsung monitor(bad color) does anybody knows wherre i can find it? thanks
|
| Toshiba vcr help | 30 Jul 2003 20:24 GMT | 2 |
Hi. I have a Toshiba V 752 vcr. Brand new but did not work unable to play videos or remove video from machine. Display just says either "auto" or "test". Had it repaired and worked fine for a week now exactly the same
|
| step by step motor | 30 Jul 2003 20:00 GMT | 1 |
for a industrial product, i search manufacturer and/or distributor for step by step motor type : 55SI-25D or equivalent. (standard motor 7.5° 12V) A google research didn't work out
|