Electronics Forum / Equipment / September 2006

I know this is a long shot but does anyone have or know where I might get a user manual for a Scopex 14D-15 oscilloscope? (Scopex
Instruments of Letchworth, and yes I've done the google). Thanks for any help.

Do any of you know where i can get this for a cheaper price.
<a href="www.buyersedge.com/Product/prodDesc.asp?XOS=3930092&pageView=1
">Sony KDL46XBR2 lcd tv</a>

Was given a Tek 2235, option 2 (what's that?) in decent shape, with
one problem.
On both vertical channels, there is massive overshoot on rising edges
on the .1 v/cm ranges and higher. The lower voltage ranges are fine.

Has anybody had any e-mail from Tom Gootee (of curve tracer fame -->
http://www.fullnet.com/u/tomg/gooteect.htm) lately?  I've been sending him
e-mails on and off for over a month now, and he hasn't managed to respond.  I
realize he was just involved in that brouhaha with the guy ...

Hi, I recently acquired a very nice portable spectrum
analyzer that appears perfect, with one small problem.
I've noticed, that over a period of 30min to 1 hr of
'on' time, I get a momentary situation which causes

HP/AGILENT 432A PowerMeter (RF/Microwave), SENSOR INCLUDED, 10MHz - 40GHz or
up dep. on sesnor.  WORKING PERFECT
Warranty.
Should goto 40GHz according to Agilent website, but maybe HIGHER depending

Hi..
Does anyone have one of these old parts in their junk box?
I need one to add GPIB capability to my frequency counter (EIP 545).
Thanks..

WARNING: EBAY ITEM# CHANGED due to THEIR error relisted under a new item#:
330024441908
HP/AGILENT 83525A (10MHz-8.4GHz) RFplugin (eg HP8350A/B, etc. SWEEP
OSCILLATORS) - RF/Microwave, near-NEW (WORKING), CALIBRATED in 2005.

For Sale: HEWLETT-PACKARD 331A Distortion Analyzer,  Late Model
http://mywebpages.comcast.net/mnowlen/hp331a.jpg
DESCRIPTION: This is the classic solid state workhorse distortion
analyzer. Covers 5 Hz to 600 Khz. Measures THD down to 0.03%. It also

Tom Gootee 1795 Schuetter Rd Jasper, IN 47546-9586 Phone:
(812)-482-7663 Fax or voicemail Tom Gootee at 1-812-482-7650, email
tomg@fullnet.com runs a mail fraud business. Please don't do any
business with him, or don't give or send money to him.  I sent him $662

I am a relatively inexperienced user of Labview. I have written a VI to
scan several channels on a 34970A using the 34901A multiplexer module
to take voltage readings. I want to use a more accurate DMM than the
internal one however so I have hooked up a Fluke 8840A to the agilent