| Thread | Last Post | Replies |
|
| Repair of HP 8753A with ROM 1L Fail fault | 28 Sep 2006 18:52 GMT | 1 |
I have just repaired an HP 8753A vector network analyzer which was reporting ROM 1L Fail at power up. As more equipment which is otherwise perfectly good is failing because of eprom corruption, I thought it might be of interest to know that such faults can sometimes
|
| HP E2050 Lan-HPIB server | 28 Sep 2006 18:30 GMT | 3 |
Does any one knows the difference between the HP Lan-HPIB server model E2050A and the model E2050B ? Is it the same hardware with just an improved software? It seems but I'm not sure...
|
| solder pot? | 24 Sep 2006 22:47 GMT | 3 |
I need to tin the ends of about 2000 pieces of 24ga stranded wire (so, about 4000 ends). This is for the wiring harness of an item I manufacture, so I'll need to do this again every few months. This seems tedious to do with soldering pencil. Is a solder pot the
|
| What Oscilloscope to get | 23 Sep 2006 18:32 GMT | 8 |
Am looking for one that can do the following: Analyse RS232 comms, logic gates etc Freeze trace would be nice (storage scope), but probably pushes the price up.
|
| Top Quality RF Connectors, Adapters, Cable Assemblies & More | 22 Sep 2006 23:11 GMT | 1 |
Please visit AAARFProducts.com
|
| Having problems with certain GPIB commands | 19 Sep 2006 18:53 GMT | 1 |
We are trying to read trace data to GPIB from our Advantest R3265 spectrum analyzer, but it seems to ignore the GPIB command strings that request data output.
|
| Manual PM3585 logic analyzer | 19 Sep 2006 11:13 GMT | 3 |
I'm looking for a pdf manual for the Philips PM3585 logic analyzer. Can anyone help? Anders J
|
| Tek Scope probe accessories | 16 Sep 2006 11:07 GMT | 4 |
im in need of some clip attachments and spare ground leads for P6106 (standard/3.5mm) and P6136 (submini/2.5mm) probes since i got mine without these parts (for about 15$ each which i consider to be a good price) I was not sucessful in finding a source of these (Tek or other brand ...
|
| godd or bad, opinions Fluke MOD 77-III (Auto-Range) | 14 Sep 2006 13:40 GMT | 1 |
I am looking at buying this multimeter for $50, Fluke MOD 77-III (Auto-Range), is this unit good, bad, looking for any onions either way. thanks
|
| HP 3325A function generator frontpanel went black - Any ideas please? | 12 Sep 2006 18:48 GMT | 3 |
My HP 3325A suddenly went black, and will not respond to pressed keys. The cpu seems to be running but the only clock on the front panel interface I can see is the LWKD that clocks 7-segment data. The other two clocks are permanently
|
| system to record a voice from the other side of a window | 11 Sep 2006 16:41 GMT | 1 |
I'm not a spy ;) I just want to design a message box to equip shop window. The microphone is fixed inside the shop to the glass of the window and a customer can record a message from the other side of the window.
|
| REQ: HP 10391B Software (Inverse Assembler Devkit) | 11 Sep 2006 06:05 GMT | 7 |
I'm trying to find a copy of the HP Inverse Assembler Development kit. Apparently it was downloadable from agilent's ftp site once upon a time, but now Agilent lists this product as 'obsolete' and there's no sign of it anywhere.
|
| Tektronix AM503 current amplifier | 09 Sep 2006 18:39 GMT | 1 |
Can anyone please email to me a copy of the AM503 current amplifier manual. It is not on the TEK website. Many thanks
|
| Tek 475 No Display | 09 Sep 2006 18:38 GMT | 5 |
Been looking at a Tek 475 on eBay with no display. I know this can be a hundred a one things, but does anyone know if this is a common fault with the 475 and if so, what it may be. I vaguely remember seeing something on Gooogle a few months back, but I can't
|
| RV backup camera and 7 inch lcd screen | 08 Sep 2006 17:23 GMT | 1 |
RV backup camera and 7 inch lcd screen I am looking for a source for a rv backup camera, and lcd screen. plus the various connectors and such. any ideas. thanks
|