Electronics Forum / Equipment / August 2006

I recently bought a second-hand 2711 spec an. I want to upgrade a few
of the features to 2712 specs.
It already has the counter option - Opt02
I would like to enable the high stab reference oscillator which was

Am looking for a 1/8" collet for a Handee Model 6600 hand grinder.  
This tool was manufactured by Chicago Wheel and & Mfg. Co.  The
collet is part no. 3025.
Thanks,

Looking for BD3 Germainium Diode to repair Singer FM-10C comm monitor.
Small diode in metal case (gold color).  Used as a single mixer diode on
front end.
Thanks

I have a signal generator with its output BNC labelled 50onms. What
does it mean? Does it mean it has pure resistive 50ohms source
impedance ? or Does it mean i have to terminate the coax i use with
50ohms from where i tap the signal?

I am looking for a few system disks for an HP 1661C logic analyzer. In
particular, I would like a copy of the system performance verification
software (Sys PV) which may or may not be a part of the main system
disk. The documentation is not clear and there doesn't seem to be any

I've been trying to get the fools at Pasternack to stop sending me their
catalogs for about ten years now. Long ago I made the mistake of buying
some attenuators which quickly quit working (besides being way
overpriced).

Our research lab is in the market for a desoldering station.  My personal
interest is in desoldering SMDs of various types, but being research it's
hard to plan what we might want to do with it next so having some
flexibility is useful.  Often we want to preserve both the board and ...

I have a home irrigation controller hat has gone faulty on one of the zones,
I have opened it up and have found one of the transistors to be faulty there
is a number on the transistor but it looks like its a part number from the
manufacturer of the irrigation unit rather then the ...

HP/AGILENT 436A POWER METER - RF/Microwave [DIGITAL display]
CALIBRATED, PERFECT CONDITION, warranty, may include sensor cable on request
Do NOT reply on Newsgroup, if email: remove "death2spammers" strings in my
address (repeated twice).  Price $199/$229, shipping from Amplitech, ...

I have a HP 1740a oscilloscope wich although old still still very usefull,
only needed a few repairs up until now,
(mains switch, longest range timing cap, vert amp transistor)
however its a bit tempermental of late,

Allah;
birzaman gayet zengin bir ressam,sergi açmak istemiş,fakat sahnenin
gerisinde durmuş kendisini konuklara göstermemiş.konuklara
hertürlü ikramı yapmış.sergiyi gezen misafirler,harika resimlere

I have a tektronix 7844 mainframe, and when I power it up, I have no
display, and the fan is not runing at all...
I only hear a "clack" aproximatively 2 times per seconds coming from
the psu

I have an HP-IB Interface module that I don't need anymore.
It is in very good condition.
I would like $125.00 (plus shipping from Raleigh NC)
If interested, contact Frank @ items4saleATbellsouth.net (change AT to @)

Anybody need mentioned eletronic equiments? Any interesting pls visit
our web:www.hskpower.com.

Hi Group,
I am looking for a way to measure the waveform of a current pulse, on
the other of 1-10uA, and with a rise time of ~1us, without disturbing
the 0.5V DC signal that is forced on this node. I was told this is