| Thread | Last Post | Replies |
|
| stud sizes of terminal boards, matching spade lugs? | 13 Feb 2006 17:48 GMT | 2 |
seek information regarding stud sizes of connectors on terminal boards,
and which spade lugs are spec'd to fit each.
by the way, how are spade lugs sized?
|
| LCR 10Hz 100Hz etc with bias control | 12 Feb 2006 10:07 GMT | 3 |
Does anyone know where I can buy a new LCR bridge that has selectrable
frequecies from apx 10Hz up to say 1KHz and adjustable bias or biased from
external source? RS232 would be a bonus.
Any link greatle appricated, anywhere in the world.
|
| wavetek 275 manual | 11 Feb 2006 14:28 GMT | 2 |
I am looking for a wavatek 275 manual
regards
Patrick
|
| Scope Calibration | 10 Feb 2006 16:48 GMT | 1 |
Finally got the manual for my Protek 6502 scope and started working with
it. Testing it's ability to "read correctly" Started by using home built
signal generator with 455k signal, from my DMM I can measure freq but
with the scope it was like 55k off of the desired freq?
|
| 20 pin ribbon style cable | 09 Feb 2006 06:49 GMT | 4 |
Anyone have any info on where to possible find a part.
I am programming/testing a lot of atmel at90s2313 20 pin DIP sockets. My
intentions are to take a 20pin dip socket and connect a cable to it so I can
move the microcontroller from test bench to programming and back with ease
|
| Manual for a HP 1615A logic analyzer | 05 Feb 2006 19:09 GMT | 1 |
Anyone have a manual for a HP 1615A logic analyzer? If not, would you
be willing to answer a few simple questions to get me started using it?
Thanks
|
| Protek 6502 Manual | 05 Feb 2006 15:37 GMT | 1 |
Where can I find one? Purchased from ebay and need to get a manual.
Thanks! Next time I will purchase new to assure I have everything I need.
Thanks!
|
| VMEBus Video Card Wanted | 04 Feb 2006 00:21 GMT | 5 |
After posting on another group I've been told to try posting on here.
I'm hoping someone may be able to help me.
I'm looking for a video card for an old printing press we use
occasionally in work. The interface is not any of the standard ones. The
|
| HP Harrison 6286A Power Supply | 04 Feb 2006 00:05 GMT | 2 |
I'm looking for the service manual or at least the schematic for this
oldie.
|
| Programming a HP 83651B Synthesized Sweeper | 03 Feb 2006 23:55 GMT | 11 |
I have a HP 85651B connected to an 8510C and I have 2 questions:
1) My 8510 says the system bus has address 1, and the pass-thru address
is 28. If my 85651
has an address of 19 then after I send "ADDRPASS 19;" on the HP-IB bus,
|
| 8086 uP Require | 03 Feb 2006 14:28 GMT | 70 |
Could anyone help us find an old very early 8086 uP for our University's
SEM?
It is a very old unit be our Scanning Electron uScope will not operate
untill we find one.
|
| NATIONAL INSTRUMENTS ISA AT-GPIB/TNT IEEE-488.2 CARD | 01 Feb 2006 17:32 GMT | 5 |
What do I need to use this card to control an HP 8568 Spectrum
analyzer, other than HPIB cables from my computer and what OS (WIN 3.1, 95,
98) should be used? Drivers? Library? Where do I go for them?
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread