Electronics Forum / Equipment / January 2005

Do to health reasons we are offering our CNC Parts exchange and Repair
Service for sale. Income is whatever you want it to be.
I limit it to gross about $250,000 a year.
Over $100,000 personal income for you.

FA: Motorola MTX838, MTX9000, MTX8000 Portable Radios - Lot Sale Cheap!

I have a S7150 DMM which I'm controlling by GPIB from Linux.
Before I had a list of commands, I was trying various combinations
to see what would happen. I've somehow managed to get it in a state
that the ERR & CAL symbols constantly flash on & off. I've tried

I have a BYTEK S15-F Multiprogrammer, but cannot find a source for
manuals/software. Does anyone know where these can be downloaded, or
does anyone have originals they could copy for me? I'd really
appreciate it and I would be more than willing to paypal you a few

i am looking for the cross reference of this hp parts : 1853-0354
thank you

I use a HP 5345B and a HP 5370A for time interval measuring ( separate
as well as common mode ).
The 5345A has a jitter stability ( useable resolution ) of 2 nS and
the 5370A a jitter stability of 20 pS.

I'm looking for 12-16bit ADC with 4MHz samplingrate capable of storing 4K
samples, with USB interface to transfer data to a PC.
Any recommendation ?

I pruchased a used, non-working 7905. Have almost everything fixed
except:
When increasing the trace brightness to an acceptable level there is a
halo present. It is not a uniform halo, but is displaced slightly up

Most of the plugins for the Tek 7603 workhorse scope will not show
their lights when their switches are pushed in with the 7603 (and
apparently a lot of other early Tek scopes), whereas they do show in
the 7904 and other high numbered models. Is their a way to rectify this

Fluke DMM's have a "new Min or Max reading" audible alert. Can this
alert/beep be heard across a dining room conversation?
Another question: Is the loudness of this alert the "same" on all
Fluke multimeter models?

I need schematics of a Hyundai HL-7448M/7984M colour 17in SVGA Monitor.
If anyone knows the values of those components : D603 (a rectifier on a pin
of the LOPT), C604 (electrolytic filter in the deflection circuit), R149,
D110. Where can I find the LOPT transformer reference ? I ...

I have a piece of equipment with a defective Canon MD350 3 1/2" floppy
drive. I need some information on interpreting the jumper settings  to help
in my search for a replacement drive. The jumper plugs are marked and
jumpered as shown below.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3869498374

I'm looking for a YTO oscillator from an HP spectrum analyser, the
part number is 5086-7781 (or 5086-6781).
This part appears in a few analysers
8560A, 8561A, 8561B, 8562A, 8562B, 8563A.

I live in Europe where the electricity is 240V and 50HZ
I just bought a (WAHL) hair trimmer from the USA. The battery charger
for the hair trimmer is made for USA (input 120VAC, 60HZ, 5W) and has
output 2.0V DC and 1100mA.