Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Equipment / December 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Soldering surface mount components31 Dec 2004 17:34 GMT119
I am planning a job where I need to manually solder surface mount ICs.  Some
of these ICs have pins that are only 0.5mm apart!  I'm worried that this
will be impossible to solder manually.
I've looked on the web - people tell me it is possible to solder SMDs but
Fluke Philips PM3335-PM3337 60MHz Digital Storage Scope31 Dec 2004 03:17 GMT1
Hi to all,
I'm looking for the following information about this scope :
- function & position of the internal adjustments,
- list of GPIB commands.
LCD TV Buyers Beware...31 Dec 2004 03:00 GMT8
Do not buy from digitalgear on Ebay!
I bought a Sharp Aquos 32" (LC-32G4U) from them over the phone (not on
EBay directly) and the TV turned out to be defected. It's simply not
working and has a little dent on the right speaker. However, they
AC adapter info for Fluke 8060A?30 Dec 2004 17:37 GMT3
I have a Fluke 8060A handheld DVM, but no user's manual, and no
"wall-wart" power supply.  Nowhere on the case does it indicate the
voltage or current needed for the external power input... it doesn't
even indicate if it's AC or DC, nor what the polarity should be in the
Portable Data Acquisition Devices28 Dec 2004 11:03 GMT12
I have been looking for a portable data acquisition device that is
relatively low cost without any success.
If you needed one, what would you buy?
I have also looked for data acquisition accessories for PDAs, pocket
Manual for Fluke 382A28 Dec 2004 03:31 GMT3
Looking for an Operation/Service manual for a Fluke 382A DC Voltage/Current
Standard.  Of course, I've looked at the usual manual suppliers web sites
(ManualsPlus, Manual Merchant, ManualMan, Gootee, BAMA, Tannenbaum, WJFord,
etc.) but to no avail.
Electronics hobby and starting cars.. 27 Dec 2004 19:33 GMT1
Sometimes my habit of messing with things electronics becomes useful..
When I got in my 41-hour-parked car, I was greeted with very dim
interior lights and no starter action at all.  
I connected my old battery charger:
Nice Used Commercial 50" Pioneer Plasma Display FA, 2 days left. PDP-502MX27 Dec 2004 15:27 GMT3
Nice Used Commercial 50" Pioneer Plasma Display FA, 2 days left. PDP-502MX
Really nice plasma display panel for auction on ebay.  Please refer to the
auction for further information.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=5739464336&ssPageName=ST
RK:MESE:IT

Good cheap scope (south UK)27 Dec 2004 08:59 GMT1
Ebay item # 3862918369
Externally connecting internal IDE dives -- Redux26 Dec 2004 01:39 GMT9
Here's my original posting
============  OP =============
I have a very large and complex rack-mounted box which contains a 14-slot
ISA bus passive backplane [physically divided into 2 separate PC segments]
looking for a group26 Dec 2004 00:17 GMT3
Sorry if this is wrong group. I'm looking for a group that can give me some
advise about a cd recorder. Any suggestions appreciated and if in wrong
group, please accept my apologies.
Koss Pro 4AA26 Dec 2004 00:12 GMT1
I have two sets of Koss Pro 4AA Earphones that I purchased around 1965.  I
use them for television programs, especially the good movies.  I like these
particular sets because the bass is not so prominent and the buzz that is
inherent in the tv does not seem so prominent in these ...
How to test HP 5221a electronic counter26 Dec 2004 00:08 GMT2
I am very sorry if this question is too "ignorant" for this group - if
so, please let me know.
I just picked up a surplus HP 5221a "Electronic Counter" (I assume it
is a frequency counter).  I bought it mostly because the nixie tubes
An EMP destroyed my electronics ! ! ! ! ! !25 Dec 2004 21:05 GMT6
The damned French tested a nuclear weapon, again.f.ck Paris!
HP1740A X-Y Mode25 Dec 2004 00:06 GMT3
I would like to build the Lorenz Attractor circuit
http://frank.harvard.edu/~paulh/misc/lorenz.htm mentioned in the recent
"Neato chaotic equations for analog computers" thread, but my HP1740A 'scope
has no external-X horizontal input.
Pages: 1 2 3 November, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.