Electronics Forum / Equipment / August 2004

Can someone pont me to schematic of EPIRB (Emergency Position Indicating
Radio Beacon), specifically 406 MHZ transmitter of it.

Anyone have a source for a Male Triax => Female BNC adapter?
Thanks
Mike

I am looking for an HP 4195A with all accessories, including the Impedance
Test Kit HP 41951A.
As for the HP 4195A, I would like to have the Option 001 included.
Please contact:   Gar   ne8s@arrl.net

Hello from Spain:
Our school (Barcelona) got five old HP8750A (Storage-Normalizer).
All of them have the Network analyzer interface. None has the Spectrum
analyzer interface.

I have just begun a project for a device that will be submerged in pool
water. The depth will be a maximum of ten feet. I am trying to find sealed
and booted rocker and toggle switches that will withstand continuous
submersion in pool water with a chlorine content of 2-3 ppm. I am ...

lookI'm ing for the generic 74 series IC number for an HP 1820-0379. I Don't
have any cross refernces  or hp bench briefs to refer to.
Any help appreciated.
Thanks

Does anyone have any experiences with Metermaster o'scopes? Would the
following used one be a good buy for that price if it works?
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&category=58282&item=3833477332&rd=1
Al-U

Anyone have the manual for the HP 3437A Voltmeter? Also, what kind of
funky BNC connector does it use?
Thanks
Mike

I have some old HP equipment with rotary wafer switches with contacts which
appear to be silver plated. They have become noisy. I have seen contact
cleaners but I worry that they may cause other problems. I would very much
appreciate hearing how others handle this problem, be it ...

I've recently upgraded my 16500A to a 16500B w/16500L, anyone have a
source for the software disks? I have 16500A and 16500C software disks,
just not for the 'B'.
Thanks

I am looking for a contactor or relay that has the following characteristics:
1) silent or nearly silent in operation.
2) Be able to handle 20 amps of current.
3) be available in a variety of coil voltages including 120VAC.

   I need to know if a newsgroup exist for Smt Insertion equipment, i need
advise on Philips csm84 machine....

Hi, hoping someone can help me out here.
I have a rotary phone from the 70s or 80s, and it doesn't seem to work with
dsl line filters at all.
My newer phones have no problem and it sounds good... So, is there something

hi to newsgroup
I have found a good deal for a tektronix 2756p analyzer.
i haven't used though in the past this instrument.
I would like to konw pros,con's for this instrument if somebody