Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Equipment / May 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Motorola App Note11 May 2004 21:46 GMT2
Has anyone got a copy of the Motorola application note Apr1.pdf they could email
over to me?
I've spent a few hours trying to find a copy on the web, but it looks as if it
has been withdrawn for some reason. Motorla refer to it a lot, but all accesses
powerfeed11 May 2004 18:16 GMT1
I m looking for a powerfeed that has a inputvoltage of 220/230 or 110 and
can deliver voltages like 5 and 3.3Volt
Someone can advice me a type?
thanks Stijn
Help11 May 2004 16:24 GMT1
I am not an electronics graduate but I need help to deisgn a toy for a
child with learning difficulties. Anyone with experience of able to
help with designing a flat pad with 40 keys.  If anyone one is
touched, it would say a word.  This is all I am looking for.
Smart Zap EPROM Programmer SX-15111 May 2004 03:19 GMT1
I recently acquired this item.  The unit power ups and appears to be
working, but can't do much more because I need info on how to setup the
dip switches.  I need a source for the Users/Service manual for this unit.
The programmer was manufactured in the late 80's by Kore,Inc. of
Valve Voltmeter10 May 2004 18:25 GMT2
Hiya,
hope this is the correct group for this question?
I have a Valve Volt Meter CT343, about 1970, J.S (NATO)  Number
6625-99-943-6282
Caller ID box with Blocking?10 May 2004 13:28 GMT4
I'm looking for a "Caller ID Box" to put in the phone line going to our
office fax machine, which will not pass incoming calls through to the
machine unless they have a caller ID.
I'm trying to limit the number of "junk faxes" which we receive every
What Tek products use a CRT 050-1601 00 ?10 May 2004 10:30 GMT6
What Tektronix product uses a CRT identified by the Tektronix part
number 050-1601 00 ?
It may be used in one of the smaller scopes.
Thanks.
How to send BIG service manuals?08 May 2004 22:27 GMT7
From time to time, I have the manuals that people want.
The current one is a 27MB file.  I'd send it if I could
figger out how...and it wasn't a lot of trouble.
Email won't take a file that big.
WTB: Cheap DMM and Freq Counter with HPIB/GPIB08 May 2004 00:09 GMT2
I'm looking for a cheap, working, multimeter for the benchtop. It has to
have HPIB. I'd also like a cheap frequency counter with GPIB/HPIB.
Thanks
Mike
FS (Reduced) Garmin ETrex Venture07 May 2004 23:36 GMT1
I have a new with manual, no cable Etrex Legend for sale. Follow below link
for full specs
http://www.garmin.com/products/etrexLegend/spec.html
Unit will accept Mapsource and other Topographic maps for download into unit
Wanted: Manual for WaveTek 3000-200 Signal Generator + Deviation Meter07 May 2004 16:32 GMT3
I am having great trouble locating the operations and service manual for the
Wavetek 3000-200 Signal Generator with Option 200 Deviation Meter. If you
have one I would like to buy it or a copy, digital or photocopy.
Reply to jmcmann{+A+T+}pacbell.net. You can figure out that you ...
need help with Marconi TF2700 universal bridge06 May 2004 00:59 GMT2
Can any one give me a few clues on how to operate this bridge its more
complex than a standard wheatstone and may even be faulty, cause I can
balance it with a resistor. A manual or any info would be nice.
Basic setup for HP 6274B DC Power Supply05 May 2004 01:31 GMT2
I have an HP 3274B DC power supply.  It seems work fine as far as
output, but the voltmeter and ammeter on the front always read zero.
I have opened the cover and everything is connected and there is no
sign of damage.  The jumpers on the output panel on the back are in
WTB: HP Logic Analyzer 1631D or 16500A04 May 2004 22:36 GMT1
I've finally decided that it is time to get a logic analyzer so I'm
searching for a 1631D with pods/clips in good condition. I'd really love
a 16500A but that is probably out of my price range. Please email me if
you have either of these for sale, thanks.
PC oscilloscope with USB interface?02 May 2004 17:02 GMT4
Hello people
I understand there are some devices, from National Instruments, that allow you
to use your PC as an oscilloscope. AFAIK they're in ISA or PCI cards.
I am interested in turning a portable PC into a portable 'scope. Are there any
Pages: 1 2 3 4 April, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.