| Thread | Last Post | Replies |
|
| how do power(Dc/Ac) inverters work ? | 23 Jan 2004 22:34 GMT | 6 |
I allways wondered how dc/ac power inverters work ? Do you really get more power than what you put ?! I saw inverters that's supplied with a 12VDC and will give 7000 W !! How come ?
|
| What's a Green Neon Lamp? | 23 Jan 2004 01:50 GMT | 45 |
I found some replacement lamps for the neon lamps that are in the HP power supplies that I got off Ebay. They're distributed by Linrose, the company that has those lousy LED displays at Fry's. I bought a regular red neon for $3 something, but the green neon is about $5, and
|
| Voltage at battery goes over 16.6VDC when generator on | 22 Jan 2004 16:36 GMT | 2 |
I just purchased a 1990 Pace Arrow motor home and discovered a problem with the Onan GenSet. The first night I tried to start it it wouldn't start -- slow turn over. This morning I hooked up a DVM to the batteries and it was about 12.03V without any load and with the shore
|
| Sub woofer | 22 Jan 2004 14:21 GMT | 1 |
I have several doubts regarding subwoofer and its amplifier -1- What is the basic difference(in construction,working and performance) between a subwoofer and an ordinary woofer ? -2- When was sub woofer first introduced ?(And who introduced it ?)
|
| don't sucker into Pasternack Enterprises | 22 Jan 2004 08:42 GMT | 2 |
I just sent them my 21st request to stop sending me catalogs. I started requesting them to stop somewhere around 10 years ago. If you ever get on their catalog list, they will send you anywhere from 5 to 10 copies of each issue. They're apparently braindead.
|
| HP 1222A scope generates sawtooth instead of flat baseline | 21 Jan 2004 23:17 GMT | 3 |
Yet another scope in trouble ... HP 1222A. Has always been working fine, but recently (after a longer pause) it suddenly has developed a "sawtooth" baseline. - periodicity ~9 ms, int'y ~1 graticule
|
| UMAX scanner problem | 21 Jan 2004 21:23 GMT | 4 |
I have a UMAX Astra 2200 scanner that has stopped working. The power LED flickers, but won't stay on solid. The User's Manual says this might be caused by failure of the
|
| Help with mid-range RFID project | 21 Jan 2004 20:06 GMT | 1 |
I am preparing for a mobile, mid-range RFID project. It involves reading up to a dozen or so tags with a portable or hand held device in a range upto 2-3 meters. The data transmission doesn't have to be fast, but there may be more than one readable tag within reading zone.
|
| Question about Ft (cut-off frequency) | 21 Jan 2004 19:15 GMT | 1 |
Hi there, I am trying to understand more about High Frequency RF measurements of Bipolar Transistors. I have a question about measuring Ft. Ft is defined as the frequency for which the magnitude of the AC
|
| WTB: HP Frequency Counter - HP 5328A or Similar | 21 Jan 2004 02:03 GMT | 1 |
I am looking for an HP frequency counter for my work bench. I would like to find an HP 5328A or similar in good working condition with the 500 Mhz or better prescaler / channel C option. Pluses would be the high stability option and the DVM.
|
| Need help - TTX 1770 Monitor | 20 Jan 2004 16:58 GMT | 1 |
Does anybody know where the VGA cable gets connected (and the pinout) inside the monitor? Thanks.
|
| Looking for Service manual for Singer SG-1000 Signal generator | 20 Jan 2004 14:26 GMT | 1 |
Looking for Service manual for Singer SG-1000 Signal generator remove the _nospam_ in your reply
|
| Documentation about Schlumberger "Solartron 7150"? | 20 Jan 2004 13:05 GMT | 1 |
Does anyone have a reference/service/maintenance manual available for the 6-digit DMM "Solartron 7150" (Schlumberger, ca. 1989)? Specifically, I'm looking for the following information: (1) function of the "special" keys on the keypad
|
| Request for Tek 2465B Man | 20 Jan 2004 02:15 GMT | 3 |
Hey, I am in desperate need of the service and the operators manual for the Tek 2465B scope, Mine started flashing an error code last week and all atempts to find the original manual have failed, dont it make you mad when you loose your stuff! anyway, please help! I need it in a bad ...
|
| led randomizer | 19 Jan 2004 08:33 GMT | 13 |
alright here's what I am wanting to do I want to put leds of different colors in the bezel of my computer case I want them to randomly flash and if possible to be powered by the 5v output on my power supply I am not sure how to do this if anyone has any ideas could you email me and ...
|