Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Electronics / July 2006



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
where to get WWV_ / GPS / other clock sync. device?11 Jul 2006 05:04 GMT7
I need to get a daily time update via a serial connection to a
microcontroller in my device.  This is for use in a commercial application,
so I need something reliable - but of course cost is a driving factor as
well.
Batteries11 Jul 2006 03:27 GMT7
Do batteries get heavier as they're charged?
Interesting Speaker Frame Designs10 Jul 2006 13:15 GMT3
Here are some photos of speakers I have acquired...
<img src="http://www.erniewerbel.com/temp/000_2622.jpg">
<img src="http://www.erniewerbel.com/temp/000_2625.jpg">
<img src="http://www.erniewerbel.com/temp/000_2627.jpg">
Teac EU3216F TV - R152 resistor value10 Jul 2006 09:59 GMT1
Can anyone tell me what the value of R152 is on a
Teac EU3216F television?
It's a relatively recent 76cm widescreen tv,
R152 is in the main power supply input section,
Trying to read a protected chip10 Jul 2006 08:11 GMT9
I'm trying to read the data from a protected chip (Samsung K9F5608U0B
YIB0)... Does anybody know what pins I would have to use to monitor the data
coming from this chip while its running? and also what software/hardware I
could use to capture the data?
I need some new speakers10 Jul 2006 04:55 GMT9
Dear aus.electronics / aus.hi-fi,
How're things?
A long time ago I bought some floor-standing speakers made from Pioneer
drivers - 2 x 12" woofers, 4" mid, 3" cone tweeter and 1" tweeter.
,---Low Cost High quality pcb prototype  manufacturer(CHINA).10 Jul 2006 04:33 GMT1
Low Cost High quality pcb prototype and Assembly manufacturer(CHINA).
We are manufacture low cost, high quality PCB prototypes in China.
we also supply RoHS Compliance,Leed Freed PCB prototype.
Silk masks are produced for the same price
.Low Cost High quality pcb prototype  manufacturer(CHINA).10 Jul 2006 04:32 GMT1
Low Cost High quality pcb prototype and Assembly manufacturer(CHINA).
We are manufacture low cost, high quality PCB prototypes in China.
we also supply RoHS Compliance,Leed Freed PCB prototype.
Silk masks are produced for the same price
TX/RX video over Fibre Optic10 Jul 2006 03:25 GMT6
Gday,
I know those things are expensive, but where can I find them in Australia.
Either single or multiple channels ?
Thanks
Silicon Chip Digital Slave Flash Trigger - sound modification10 Jul 2006 01:12 GMT4
Has anyone modified this unit for sound triggering?
There are many photos on Flickr using a sound triggered module that is US$99
and I am wondering if the circuit in Silicon Chip or more recently
republished in a UK electronics magazine would be able to be modified simply
WORLDWIDE-DROPSHIPPING.COM09 Jul 2006 18:50 GMT1
Hello from wORLDWIDE-DROPSHIPPING.COM,
Welcome to WORLDWIDE-DROPSHIPPING.COM
(http://www.worldwide-dropshipping.com), we are a new
webstore offer Electronics products at very low prices.
PIC18F1320 compiler09 Jul 2006 12:57 GMT3
does anyone know where I can get a compiler that supports the PIC18F1320
microcontroller? I specifically need one that runs under linux, command
line would be great. C++ or assembler, im not to fussed. free would be
even better, moon on a stick would be fantastic.
Square to Sine Wave converter09 Jul 2006 12:48 GMT1
I have an inverter that puts out a nice 120v square wave. The inverters that
put out a pure sine wave are expensive. Does anyone know where I can obtain
schematics to build a square to sine wave converter fo my inverter? Thanks
in advance.
Sine wave signal generator09 Jul 2006 02:32 GMT3
Hi.  I've been tinkering with the odd electronics project for a few
years now, but I'm stumped on this one.  I've constructed this circuit:
http://www.yellowmackerel.co.uk/circuit.gif
(Originally from here: http://www.4qdtec.com/singen.html , but the
Audi A6 3.008 Jul 2006 23:32 GMT10
I bought a 2004 Audi a year ago. recently the floor flooded and I had
taken it to the shop.  I then was told the engine ceased, due to the
timing belt... does anyone know if this could be possible?? I dont know
much about cars, but have concerns as the engine died in shop.  Thank
Pages: 1 2 3 4 5 6 7 8 9 10 June, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.