Electronics Forum / Electronics / July 2006

I am wondering who the suppliers of the cable ends are that permit phones
to connect to laptops and PDAs? If I were to change phones/PDAs over time,
I could start to build my own bridge between PDA/phone by buying the cable
cheap directly from the supplier.

Hello newsgroup,
I've been working with this circuit:
http://www.rason.org/Projects/icamps/icamps.htm
But I need to modify it slightly as the input will be two channels

Viafine Electronic & Technology Limited (http://www.viafine.com) deals
mainly in the supply of Printed Circuit Boards (PCB,FPC), Single-Sided
PCB(http://www.viafine.com/english_single_sided_pcb.html),PTH
Double-Sided

  While searching for something else, I discovered a 2MB 127 page
.pdf file which is full of useful reference info about electronics,
components and things related to electronics, with a lot of handy
charts etc. Well worth the 2MB download, I thought.

In recent months when watching DVDs on my 66cm w/s Thomson 28VK25EA tv
using my Philips 736K DVD player connected via S-video, there are
numerous roaming and stationary wavy lines throughout the picture.
http://members.optusnet.com.au/thecosmichobo/scribblygum.jpg

I know you do this sh.t terry!
I have just done the 'correct' calculations for the trace widths on a
motor drive i am designing. I have gone for worst case of 15A of
supply to the bridge @ 400Vdc. Realistically its probably only going

Was looking for a group aus.rec.camping or similar but there isn't one,
as  this post pertains specifically to a powered camping site.
I have a Clipsal Lifesaver portable power outlet with overload and RCD.
It is a 15amp with the special type 3pin plug and a 1.5metre lead.

I'm having problems programming a pic16f88.
I have a JDK type programmer (PG2 from Olimex) and am using WinPic
(also tried ICProg but have removed it and drivers due to possible
conflicts with WinPic).

HI, can anyone tell me where I can get a circuit diagram for a TEAC CT-M342H
colour television please?
Thaks in anticipation
D Hockley

I have ordered some medium power motors from Electus. Cat number YM2707
I need the little cogs that go on the end of these motors just like the ones
pictured here
http://www.netbay.com.au/~haxby/UniBoard.JPG

Hello all, I have been working with an interfacing project lately and I
think I have "screwed up" my parallel port.  When trying to read data
from the data register (set from an A/D converter) I wasn't getting
correct results.  After some "experimenting" I realized one of the pins

Is it OK to use a vacuum cleaner right next to a computer?  Could the
vacuum cleaner generate magnetic fields strong enough to affect the
hard drive or RAM or anything else in the computer?

I have a SONY DVD player that's about 5 years old or so.  It workes
well however on some of the "newer" DVDs I cannot hear the people
talking.  I can hear the music, some sound effects etc... but no
voices.