Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Electronics / March 2006



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Web Cams14 Mar 2006 12:00 GMT1
new web cams with built in mic.$25 + $5 postage within Australia
OSD IC required14 Mar 2006 08:14 GMT8
I am looking for a On Screen Display IC for 8-bit micro controller
application that needs to create colour graphics and text on video monitor.
Preference for unit that can gen lock to external signal as well as
run stand-alone.
Charging batteries inside an appliance.14 Mar 2006 07:35 GMT1
  I also have an interesting idea below which may help you or other
people and I am wondering if you know anything about it
 In some items such as digital cameras and MP3 recorders the batteries
can be hard and
Help! electrolytic capacitor 5000 MFD needed14 Mar 2006 01:40 GMT20
Looking for a replacement for a blown Mallory electrolytic capacitor for a
power supply.  The capacitor has three terminals, 2 red and one black.  The
capacitor label has the following notation:
Mallory
Technology bites back!14 Mar 2006 00:22 GMT2
http://www.theregister.co.uk/2006/02/15/freeview_transmission/
OK, this happened a few months ago, two out of 15M isn't bad but its
still an unusual failure mode.
http://www.theregister.co.uk/2006/03/13/leak_sprinklers/
PIC Timing Acuracy13 Mar 2006 17:21 GMT6
  I have a plan for a PIC project but im not sure about the acuracy that
can be achieved with a PIC.
Basicly I will be using a number of dealy routines but I need the PIC to run
for 2 months and it must not lose more than 2 minutes per week. I intend to
Clearance sale Fluke 9010 pods13 Mar 2006 17:10 GMT17
6502  $150
Z80   $175
6800  $65
8048   $50
need help with build a LED backlit!12 Mar 2006 21:07 GMT4
I have a electoric handhold sudoku game system,
is there any easy way to build at backlit for the LED screen?
thanks
Will
Speaker to line-in?11 Mar 2006 20:04 GMT2
I was wondering if there is a way of converting the speaker output of a
cassette player to a signal suitable for line-input of a PC audio card.
There is no headphone-out on the device. The intention is to fit a car audio
cassette player into the PC. Will it even fit? Has anyone ...
Water engine printed circuit11 Mar 2006 19:12 GMT3
I am basically looking to expriment the water engine on a lawn mower. There
is no really problem mecanicwise but I did not find somebody able to build
the printed circuit for it according to the plan I have got.
Anyone interested or knowing someone who could be?
nested loop delay for 16F84 PIC11 Mar 2006 15:38 GMT8
I am relatively new to PIC programming, I have written a short sequence
with a nested loop delay that last about 0.2 seconds
------------------------------------------------------------------------------------------
;SUBROUTINE SECTION.
KSC5027-R NPN Transistor11 Mar 2006 03:49 GMT4
Can anyone tell me where I can pickup a KSC5027-R High Voltage, Fast
Switching NPN Transistor or equivalent in Sydney? It is to replace a faulty
one inside a PC ATX power supply. Datasheet:
www.fairchildsemi.com/ds/KS/KSC5027.pdf
A Message for Jean-Paul Turcaud10 Mar 2006 23:57 GMT8
For several years now you have made a serial pest of yourself on various
Australian and New Zealand Newsgroups.
If you continue to post you rantings and ravings on any of these newsgroups,
you will be targeted.  By this I mean that everytime you turn on your
Noticed any recent bare PCB leakage problems?10 Mar 2006 11:42 GMT5
Has anyone noticed a recent increase in board leakage in FR4 Double sided
boards? We have some high gain preamps that have worked for 8 years no
probs, then found leakage on boards from an Aussie and a Malaysian
supplier. This first happened around November.
Possible Transformer improvement.10 Mar 2006 08:31 GMT2
http://www.newelectricity.co.uk/Transformer/transformer.htm
Signature

Chris

Pages: 1 2 3 4 5 6 7 8 9 February, 2006
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.