Electronics Forum / Electronics / December 2005

Hi everyone! I am trying to find a cheap way I can increase the
current capacity of a power supply by installing fuses to each output
of multiple universal power supplies, setting each polarity
correctly, setting each voltage correctly, but in other words combine

I am looking for Imagecraft C compiler for 68HC11 windows version. Where can
I get it? Please help. I saw one for $239. I need something cheaper. Thanks

PA is just so bloody stupid, I asked a question re poor AM reception and
several people replied with constructive advices, including PA!!!
Now I thank people for their help & I'm trolling according to toaster boy.

Thanks to all who replied with genuine info
Robby

Can you get high quality or "better then average" sound out of  the AM tuner of
a hifi system.. Typically speaking something like an AM/FM tuner going through
an amplifier and such?

sorry all, somehow all my old saved messages got reposted onto the
group
Foley U. Matthews.       there | I believe in : Paying NO voluntary taxes, i.e.
are no e's in my true email    | Lotteries, Gambling... The Executive Producer

Could someone explain me how does design from page 12 of
http://boss.iele.polsl.gliwice.pl/pdf/National_Semiconductor/lm3914.pdf
works.
Why all the LEDs are blinkink while the last one begins to lighth ??

I am preparing to do a review of various arcade trackballs and had the
idea of using a digital tachometer to measure how fast the trackball
would spin.
The idea is I can take a power source, like an r/c car's wheel and

Hi folks. Sorry for asking what is a dumb newbie question here, but my Forte
Agent is not avialable to me at the moment, and I'm not too familiar with
OE to do much of a search.
I want to convert my granddaughter's 2 x AA alkaline cell torch from

First off please forgive the crosspost but it is relevant.
http://groups.google.co.uk/groups/abuse
Due to a certain person's psychotic outbursts try these guys
and see where we get.

I want to signal 5 years of notes of Electronic Engineering
at the University of Rome Tor Vergata
proposed to you in the shape of questionnaire with answers,
I spend really much effort at that time and also now for the

Greetings Newsgroup.
I would like some advice on installing a video camera surveillance
system.
The camera will be connected to a vcr which may be recording in LP

I want to build a little device that will measure current flow to/from my
deep cycle batteries. I want this use a microcontroller to provide data
collection etc. The currents involved will be 0-30amps, either direction (
load and charging).

I have a large board which asks for three power supplies, +3V, +3.3V and
+-5V.
First two can be easily satisfied with two HP power supplies (each has its
own

can someone tell me the value of D608 zener in power circuit please
shayne