Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Electronics / February 2005



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Loud Music From Neighbor!!!28 Feb 2005 20:13 GMT16
My basement apartment neighbor plays his very
loud cd stereo system. (rap music) His system is approximately twelve
feet from my 1st flr apt. I tried a rational conversation with
him as well as complaining to the landlord but to no avail.
Low bias mosfets28 Feb 2005 19:38 GMT1
Can anybody help Im looking for low bias mosfets 3-5V. Any names of
mosfets or companies that produce them please.
Regards
Turning a light on and off with momentary switch28 Feb 2005 13:11 GMT46
I want a circuit that will turn a light on with the press of a momentary
switch and then turn it back off when the momentary switch is hit
again.  I had heard that a flip flop might be the way to go.  After some
reading, I have found that a flip flop is a much more complex device ...
Digital dimmer: Triac vs MOSFET in a circuit?28 Feb 2005 12:16 GMT19
Digital dimmer: Triac vs MOSFET in a circuit?
I want to dim a 120Volt-60Watt light with a digital controller.
I already have a circuit that use a Triac but I would prefer to use a
power MOSFET.
Looking for Power Mosfet28 Feb 2005 10:20 GMT4
I've got a gigabyte motherboard (GA-7BAXP) that has suffered a blow out due
to capacitor leakage.  The power mosfet I'm looking for is marked 70N03S.
I've determined that it was made by Intersil/Fairchild and it's part number
is RF1S70N03SM.  It is in a TO220AB casing i.e. the ...
Dodgy RCA connectors need replacing28 Feb 2005 10:04 GMT4
the RCA input ports on the back of my Sony stereo a faulty. The right
port seems fine but I get no audio out of the left when playing
through these connectors. I can get sound if I push the left RCA cable
around a bit. However as soon as I let go the sound disappears again.
any place on the web to learn electronics?28 Feb 2005 09:50 GMT3
hello, is there any good site that teaches you everything you need t
know about repairing or building electronic equipment such as TV's, c
players, studio and DJ equipment? I would love to learn. Does anyon
know of some sites out there that teaches you everything abou
Tesla coil?28 Feb 2005 04:20 GMT6
I'm bit curious about Tesla coil..does the Tesla coil have any
practical use, apart from producing powerful sparcs?
Thanks,
--Dusan
FS: [MELB] Old Microcomputers  28 Feb 2005 01:08 GMT1
2 x Electronics Australia (Signetics) 2650 Baby Systems $25 the pair
1 x TRS80 Model 1 Keyboard Unit $20
1 x TRS80 CoCo (Hard Keyboard) & Game Catrdidge $20
1 x VIC 20 In box (no ps) $20
Green Powercell AA 24 for =?ISO-8859-1?Q?=A31?= in UK27 Feb 2005 22:35 GMT1
Just what is the capacity of these cells, seems to be about 1ah
Also, composition, zinc chloride ??
They seem to do a reasonable job, @ 4p each, if you don't exert too high
a current drain
lm 194927 Feb 2005 21:07 GMT24
hi,  does any body know where i can get the LM 1949 injector drive in
australia ?
thanks.
mark k
Help Using 74HC594 Shift Register (Please)27 Feb 2005 20:10 GMT2
I've been trying to interface a SN74HC594 chip to an AVR 2313 (using
avr-gcc)
and having a tough time with it.
I have the following function, but it appears as if only the MSB get's
floppy drive music player27 Feb 2005 20:08 GMT7
I am trying to create a driver circuit to allow recording and playback of
sound to a 3.5 inch floppy disk using a standard floppy disk drive...
I know that normally information is recorded to the disk in a modulated
format (specifically MFM - modified frequency modulation) and that ...
Burning text, artwork etc onto a cd surface27 Feb 2005 19:02 GMT7
I recall some years back there was discussion on how to actually burn
readable text, patterns or such onto the surface of a CD-R using a
burner - but at the time it was supposed to be nearly impossible to do
with massive technical problems involved on getting everything to burn
Amplified indoor antenna27 Feb 2005 18:57 GMT1
What is the best & cheapest amplified indoor TV antenna suitable for use in
Belconnen, ACT.
Thanks in advance
eltan
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 January, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.