| Thread | Last Post | Replies |
|
| Remote control for really, really old TV | 27 Apr 2004 06:28 GMT | 7 |
Does anyone know if there are units you can buy that will allow you to control the power and volume of a very old tv? I remember old cable boxes could do this but have never seen a stand alone product that could.
|
| Testing Something | 27 Apr 2004 05:52 GMT | 2 |
|
| Sub Woofer | 27 Apr 2004 05:51 GMT | 2 |
Can I convert a 80w non active sub woofer into a active sub woofer? Is there a kit or unit I could buy?
|
| What's with the new DVD power switches? | 26 Apr 2004 22:42 GMT | 2 |
I just bought an DVD player and the power switch has a light which always seems to be on. Is this a new style or is there something wrong with the device? It's an Advent DVD2200. --
|
| Canon Scanner cold cathode light replacement. | 26 Apr 2004 22:29 GMT | 9 |
I've got a Canon D660U flat bed scanner. The cold cathode light has dimmed and the scanner is reporting an error along the lines of needing more warm up time. Tried another PC - same problem. DC supply to scanner from wall is OK when plugged in.
|
| Altitude, flight height reading | 26 Apr 2004 16:29 GMT | 11 |
What would be the cost effective but accurate way of reading flight height (altitude) of model aircraft and how this reading would relate the local QNH
|
| Panasonic microwave - only stop & start buttons working | 26 Apr 2004 07:44 GMT | 4 |
I have a Panasonic microwave, model NN-5454B (white one that says "Welcome to word prompting" when you turn it on. Yesterday all the buttons except "stop/reset" and "start" stopped working. Tried resetting the power - still no luck. Can't make it cook, obviously,
|
| Hot Tub arching | 26 Apr 2004 04:01 GMT | 9 |
I have a hot tub control that switches the heater element on and off to set the water temperature. The thermostat has 20 amp contacts, that tend to burn out. I replaced the thermostat , then installed a slave mercury relay (contact rating 25A at 240
|
| What's a good CRT widescreen tv? | 26 Apr 2004 01:00 GMT | 7 |
In the market for one now. Nothing huge. Around the $2k-$4k mark. thanks Troy
|
| Caller ID box with "No ID" Blocking? | 26 Apr 2004 00:35 GMT | 7 |
I'm looking for a "Caller ID Box" to put in the phone line going to our office fax machine, which will not pass incoming calls through to the machine unless they have a caller ID. I'm trying to limit the number of "junk faxes" which we receive every
|
| 9V battery grounding issues | 25 Apr 2004 23:55 GMT | 5 |
I am using a 9V battery to power 6 LM324s (Quad Op-Amps), which requires a ground connection, not a -VCC. When I tested the circuit using an electronics kit to provide the voltage, it works fine, but when I replace the electronics kit voltage with the positive and
|
| Faint L.C.D. Display?? | 25 Apr 2004 20:02 GMT | 3 |
Before I start, I have tried a Google search, and no luck. I have a digital, hand-held tachometer for checking the r.p.m.s of "stuff". I can read the display, but certain bars of the display are very faint and I must play with the angle to see the numbers.
|
| It seems my research has already been done..... | 25 Apr 2004 08:17 GMT | 4 |
Geezus Phil Allison, I was expecting this to be a little harder. But it seems that you've already pissed a few people off, huh? Well, I'm gonna enjoy this....... And I suspect there will be a few people who will not cry over your torture.
|
| Dryer plug for our British treadmill??? | 25 Apr 2004 07:23 GMT | 3 |
Our British treadmill is a juicy 5' from our (U.S.) 220V dryer outlet, and since that treadmill has now blown the third fuse (in as many weeks) on our specially-bought transformer (though I reckon the fault lies more with house voltage spikes), I am wondering....
|
| Giant B-7971 Nixie Tubes Available Here! Reliable and Honest Source. | 25 Apr 2004 06:51 GMT | 2 |
I am respectfully submitting this information to all Radio and Electronic enthusiasts, collectors, clock makers, tinkerers and dealers in this newsgroup. This may be of interest to anyone looking to obtain Old, B-7971 Burroughs Nixie Tubes.
|