Electronics Forum / Electrical Engineering / June 2009

I was in a hotel this last weeken and noticed that they not only had the
exit signs above the hall doors so people would know where the exits were,
but was wondering why they also installed exit signs to the right of the
door just above the base board on the lower right corner.

Why was it Jane that waved a family dead?
http://www.geocities.com/jongiff2000/janes_song-serpent_cross.html

We are moving a hoist from a location in Pe. to our Ar shop. It was
supposedly in working order and when we tried to wire it up it is
malfunctioning. When you press either the up or down buttons sometimes
nothing occurs and sometimes the coil of the contactor will

IT SUCKS
NICE TOUCH POSTING COMMERCIAL AND BOOTLEG CRAP
I WILL BE DEEP PROBING EVERYONES ANUS FROM NOW ON
SPECIALLY THE COX.NET TROLLS FAGS AMD HAGS AND THE OTHER FLAMERS HACKS

Hope one of you guys can help me. I need to install a timer switch
(stair case timer) and a friend gave me one... but it seems more
complicated than I thought (I am an accountant!!!)
my connection has 2 wires (P and N)  and the thing has 5 connectors

Can you specialists help me attach a lead to record messages from my
telephone answering machine.  Thanks in advance for any help.
I want to archive some messages from my answering machine.  The
answering machine is built into a DECT cordless phone which is one of

I have a ceiling fan in my master bedroom with a light kit on it and when
you run it at night it looks like it is shaking and making a rattle noise.
Other than relocating the pull chain for the fan to keep it from hitting the
glass cover over the lamp, how could I get it to stop ...

I am trying to find a component that does the following:
(1) Operates as a thumbwheel, i.e. to be mounted so that the edge of
the wheel protrudes from a casing through a slot.
(2) Has mechanical detents, i.e. it doesn't smoothly roll, but clicks

What is the name of the brittle plastic used in UK electrical
fittings for mains wall sockets and that sort of thing?
I mean the plastic that a bit like the old bakelite.

Someone using the name Candy has been spamming this group. This spam is
not only annoying butis toxic. It screws up MT-NewsWatcher.
Bill

http://www.youtube.com/user/berrygirl1964
What's the difference between a girlfriend and a wife? 15 years and 45 lbs.
What's the fastest way to a man's heart? Straight through the chest with a
sharp knife.

hello, sawadeekharp ( in Thai)
i want to know what is power factor. Why do it appearance ? What can i
do with it ?
What are its effects? And the others you know with it.Please help me .

I originally posted this to the woodworking group, and was (probably
wisely) referred here:
I recently bought a used Rockwell bandsaw, which had been refitted
with a Baldor 1 hp motor, that was set up to run on 220V.  I was told

sorry for my absence , it is 22KV, 100A, 50mm^2 ACSR,1.7Km long,3
phase. I want to know power losses. And if u can, i want to know
power percentage losses. Thanks you.

I want the formula to calculate to calculate losses percentage of 3
phase ac power line.