Electronics Forum / Electrical Engineering / August 2007

Can anyon help me with finding a thermal cutout that is designed to
switch at 210-225 degrees C.  I would like this component to be
physically small, if not tiny, fit within a 1/2" in/sq area.. ;) any
help would be appreciated.

I have the latest version of Thermodynamics: An Engineering Approach
Cengel Boles 6th Edition solution manual. This is the full solutions
manual in PDF format 12.5MB. please feel free to email me with
concerns  SAMPLE OF CHAPTER 1 LINK BELOW. Manual will be sent via

Can anyone tell me if there are any circumstances when it is permissible
(under current regulations) to join 240V AC domestic wiring using crimps?
Additionally can anyone point me to the relevant regs that either allow or
forbid this method of cable joint, please?

i wanna know the general efficiency electrical power transmission
system.....can anyone plss help me???

loking for advise fro ligtning protection for stadium and recommended
method of installation for conductors on metal cladding taking into
considersation of heat expansion where traditional method of saddle
and clip are not advisable

I bought a gearmotor on Ebay, and it didn't come with an obvious wiring
diagram.  Since I'm still working my way up to the status of Rookie, I
haven't figured out how it goes.
There are two solid black wires and two solid blue wires.

Just want to confirm if my calculations are correct using the following
example:
3 pole mounted 100KVA Transformers connected 3 phase ... is the total KVA
output capacity of this bank of transformers 173KVA??

this is queston is asked to me by my teacher please help me...

In message <brep3e$2keco$1@ID-140397.news.uni-berlin.de> which was published
in these
newsgroups on 13 Dec 2003, the following is asserted.....
"The term    e^(-jwt)  isn't some magical time machine relating to  "minus

Describe difference between the constrution of slipring & squrrel cage
motor...Please help me
Learn OR know me about CONSTRUTION OF SLIPRING & SQUREEL CAGE MOTOR...
The Guru

Dear friends
Can anyone help me to how calculate everything about capacitor Banks?
Best Regards

Govind
View profile
    More options Jun 24, 5:06 pm
Newsgroups: alt.engineering.electrical

Why Single phase induction motor is not self starting?

Difference between shaded pole motor and spite(single) phase motor.
please try

3.5 year old Dell. Won't power on, supply fan doesn't spin.
Pulled supply & it powers up outside the PC. (10 ohms between
any red & black wire; green wire shorted to black for testing
outside the PC). Pulled everything from the mobo (motherboard)