Electronics Forum / Design / July 2008

I'm writing a paper on the history and theory of Digital Delay
Generators. So far, the HP 5359A seems to be the first "modern
architecture" DDG I know of. HP did another, possible older, unit
based on a triggered crystal oscillator, if you can imagine such a

GENERAL DESCRIPTION
The CM1084 series of high performance positive voltage regulators are
designed for use in applications requiring low dropout performance at
full rated current. Additionally, the

Discount Coach Sandals, Dior Sandals, Prada  Sandals, Chanel Sandals,
Versace Sandals, Crocs Sandals, Women's Sandals Men's Slippers From
China
Discount, Prada Sunglasses, Discount, D&G Sunglasses, Discount,

Just in case this might help others:
http://en.wikipedia.org/wiki/Candela
This page notes that a *unifromly-emitting* 1 candela light source yields
12.5 lumens - the frst reference I'd found which mentioned this did not

Is there anything better than this cheesy X10 stuff, something that is
_not_ RF based like zigbee would be, and still affordable? The X10
protocol is not good and the modules are IMHO utter junk.

Julius Caesar: "Veni, vidi, vici"
Barack Obama: "I came, I saw, I flinched" ;-)
                                       ...Jim Thompson

http://www.sandia.gov/news/resources/releases/2007/sunshine.html
"Stechel says that researchers have known for a long time that
theoretically it might be possible to recycle carbon dioxide, but many
thought it could not be made practical, either technically or

You’re invited to join the DSP Group on LinkedIn. Joining will allow
you to find and contact other DSP (Digital Signal Processing) members
on LinkedIn. The goal of this group is to help members:
* Reach other members of DSP Community

How would you like to earn $100* just for signing up your F'REE
Account?
How would you like to earn another $100* for every person that you can
give $100* to?

ZenZuu is a next generation social networking platform that lets you
create a profile similar to other ancient social networks, except our
leading edge technology allows you to make money by signing up your
friends and receive revenue sharing. Seize your opportunity to cash in

Laser Hair Removal - What You Need To Know
http://medical-beuaty.blogspot.com/2008/07/laser-hair-removal-what-you-need-to.html
Laser Hair Removal Parlors In The City Of Toronto
http://medical-beuaty.blogspot.com/2008/07/laser-hair-removal-parlors-in-city-of.html

I'm currently using the SAA7108AE IC from NXP (Philips) for a video
decoding and encoding application. The decoding part works well so
there's no problem on this side. However, I have trouble making the
encoder work. The encoder part of the SAA7108AE is pretty much the

Huge Selections at Great Prices The Convenience of OneCart
http://good-furniture-care.page.tl/rint

I have a power supply with some big 400Volt electrolytic caps with
100kOhm resistors in parallel to drain them for safety, I was wondering
if a d-fet could be used in series with the resistor so that once the
power supply is online, the d-fet could be turned off, to save power

I need an op-amp for a buffer application (in DC) with this features:
* single supply: +5V
* high output current: > 100 mA
* package: through-hole, small as possible like TO220 or metallic case