Electronics Forum / Components / November 2005

Heya.
I have rescued an older capacitor from a Mobo, of undeterminant
origins, and I discovered it (or I should say they) have 5 leads.  a
-. 1, 2, 3, 4.  I've tried looking it up on the net, but I've had no

where  can I buy such resistor in very short time? I need 80 pcs. but I can
buy also a reel.
Normally I can buy it in 6-8 weeks. Maybe someone have got such resistor on
stock and don't need it...

I am trying to establish the characteristics of a capacitor in a
circuit.
It is red, about 1 cm square
It has the following information stamped on it:

Does any1 know how to do Nodal Voltage Analysis? If so please get in
touch because I need some help with it!

Looking through my "stuff" and found these items I have had for ages. One is
a (Brown converter for continuous balance system)  The other a (S.P.D.T.
synchronous converter switched by 19 volt AC) What and how were they used?
WW2 stuff so only you oldies may be able to help. ...

I've been trying to figure out if samsung laptops with different
suffixes are always compatible like L01 L02 and L04.  According to
samsung the last number indicates the number of LVDS channels.  In two
channel operation one channel carries odd rows and one carries the

I'm looking for a data acquisition system, ideally a card to go in a PC but
I'll take whatever I can find (& pay what I have to!) which is just a bit -
or two - better than I can locate..........
Ideally I want 18 bits at at least 1.5MS/s; a bit faster, another bit would

I am looking for a PCI card that would plug into a PC and would be capable
of accepting an analog signal from a thermal sensor and converting it to a
digital value accessible by a shell script in Linux.  Range: room
temperatures.

Hi. I have some SOIC-chips, but I don't know how to use them.
How can I solder those small ICs onto a board? Is there any good techniques
I should know of?
Thanks is advance.

please send me the latest electronic components and description also.

I have recently found out that my supplier for a DIAC st 4 has folded
thus rendering this part obsolete unless I can find someone else.  I've
looked all over without any luck.  Any suggestions out there?

I am looking for a dual banana plug connector to match the socket on a
Leitz microscope from the late 1960s.  The individual plugs are somewhere
around 2.5 mm to 3 mm diameter and about 12 mm long.  The spacing between
the plugs is about 13 mm.  All I need is the plug, not the ...

Went looking for small quantity of LM337LZ, a TO92 100mA negative adjustable
regulator (counterpart of LM317LZ).  Was surprised to discover that Mouser
no longer stocks them and Digikey has 0 in stock.  (Newark and Jameco do
show stock, though.)

I need a 144 pin Micro-DIMM connector (JEDEC standard MO-214) for a
motherboard design. So far I have only found the MM41-series connectors from
Japan Aviation Electronics (JAE) Industry.
Is anybody aware of other manufacturers of micro-DIMM connectors ?

Dear Members,
We are ready to supply you. Let us know your request, we do able to send you our real stock and price with international delivery.
Thanks !