Electronics Forum / Components / May 2005

I remember them well, I have some literature from them.
Read Seller's Payment instructions.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7518415146&rd=1
--

LS7232ND
I need a datasheet for LS7232ND LAMP DIMMER(LSI)
Does anybody know where I can find one or something that can help me
out?

http://www.geekinformed.com/content/view/241/1/
--
@@F@r@o@m@@O@r@a@n@g@e@@C@o@u@n@t@y@,@@C@a@l@,@@w@h@e@r@e@@
###Got a Question about ELECTRONICS?   Check HERE First:###

I'm the new proud owner of a R-390A.  (Some will say I'm a fool but
I had to follow my heart!)  It's rackmount, which is great because
I've got rack space.  I want to keep it well fed and ventilated.
At the moment, the rack has a 10" EG&G/Caravel Rotron fan in the top.

Compare these two auctions.
<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7516792229&rd=1>
<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7517481615&rd=1>
Heh.

Hello to everybody, first of all sorry for my English (I'm Italian).
I have a circuit, enclosed in a plastic box, where there is power
resistor 1K, 50W and Tmax=200 degrees centigrade.
On the resistor is not present any heat sink.

As far as I know you can use PIC with its Basic language compiler. What
about C/C++? does it support the C programming language too?
Any suggestions for somebody new to this field? so far, I have read
some books about Digital design and programming. what else do I need?

I am developing a product which requires interfacing my 5V circuit to
another 5V circuit whose power supply I have no control over, which
varies from around 4.75V to 5.25V in practice.
I wish to build my circuit's power supply to track the other circuit's

Dear sirs,
We are one of the electronic component supplier for your reference.
We can supply you the following passive component with low cost.
Multilayer Ferrite Chip Beads

I am looking for a IR reciver module with bandwidth greater the common
40khz (namely 10 to 100mhz or more) and a recemendation for a suplier
Thanks
Jeromie

Looking for LH28F016SCT-L95 in small quantity at a reasonable price,
anyone know of somewhere that stocks them or do you have a couple on
your shelf gathering dust?

I wonder if anyone can help me please - I'm on the lookout for a
couple of 82S115 PROMs (old 24-pin devices from the 1970's) - blank of
course.
Can anyone help please, either in recommending a supplier or, maybe,

Labeled: Plessey Ducon pulse grade capacitor part number p200. Made in
Australia. I need this or a compatible replacement. It's a round "barrel"
with two wire leads (blue and brown). The housing is about 2" in length and
1 1/4 in diameter. Please email me if you can help. Thanks in ...

In an old tachometer I have found an O318 transistor (?) . Could somebody
please help me to find some data about that.
Thanks an best regards,
meder@sztaki.hu

In an old tachometer I have found an old O318 transistor (?) . Could
somebody please help me to find out some data about that.
Thanks an best regards,
meder@sztaki.hu