Electronics Forum / Components / January 2005

I just puchased a new timer relay Midtex 658-44 with variable on and
variable off delays
I want to run the load on for a few seconds every few minutes
so I want to use configuration 6 on the document.

I'm looking for a 200 - 250V FET with low Qg, low RDSon (only needs maybe 3A
peak Ids, but low RDSon for efficiency) and LOGIC LEVEL GATE for use in an
SMPS that only has a 9V supply - the SMPS is in boost configuration to give
180V @ 20mA out, probably going to use the LTC1872 if I ...

So I have an old Sprint Plus EPROM and PLD programmer. To use the latest
software I need an SMP module for it. As the programmer is not supported by
its manufacturer, DATAIO, they cannot help me. Anyone can help me to get the
module or can tell its contents so I can build one ...

I have a BYTEK S15-F Multiprogrammer, but cannot find a source for
manuals/software. Does anyone know where these can be downloaded, or
does anyone have originals they could copy for me? I'd really
appreciate it and I would be more than willing to paypal you a few

I need a source of low ESR 33 uf 25 volt caps. The ESR should be 100
milliohms or less and reasonably available in small quantities. SMT or
through hole okay. Thanks for any leads.
Mark

Never seen a semiconductor manufacturer forwarding direct product
related technical questions to a local sales guy at a distributor!!
After that only bloody silence....
Is it just me or is this company really a PITA???

Hi fellow hobbyists (and professionals!) ;-).
I'm on the net since may 2000 and just started to discover Ebay a few days
ago...serious! :-)  There's some interesting components i can't find in
stores in Montréal...espacially good deals on leds. Because of the newer

I'm looking for the following discontinued chip from Analog Devices ,
the ADV478KP80E ......
This is a CMOS 80MHz Monolithic 256x24(18) Color Palette RAM-DAC
I have found a couple of sources for it but they only sell in

If you can provide me with these I can use one but will settle for more
being it aint worth anyone's time/effort to sell just one. Thanks in advance
for any help anyone can offer.

we have redesigned a microprocessor based board with a new micro and
now find that we have a 400 pcs excess of stock of the ST
microcontroller model STMST62T35BQ6. If anyone is using this micro and
is intreseted in purchasing it at a reduced cost, please contact me off

I pulled a bunch of sram chips from some 486 motherboards I would like
to use for some projects.  The chips are UM61256bk-20's and
UM6164bk-20's.  I've done some major googling around but with no
success.  I did find some info on the UM62256, but I don't know if

Hi,
does anybody know which company (or companies) produces the shutter
release switches, used in all kind (film and digital) of photo camera?
I mean those switch which can have a "half-press" position and a

Hi,
Any info on reliability and ruggedness of 0.025" pitch flat cable and
associated IDC connectors (0.05 x 0.05") compared to 2.0mm x 2.0mm
(with 1.0mm pitch flat cable)?  

Is there a copany sampling USB transceiver chips to be used for FPGA design?
Fairchild has accepted the sample request but denied few days later
without any reason...those bloody bastards...
I know Philips has some but they also suck big time in sampling...