Electronics Forum / CAD / June 2005

Is it possible to get tabular data out of this version of spice? Old spice
used to have the .print statement, but I did not find any equivalent.
Thanks!

   Im trying to evaluate using a crystal as the tuned element of the phase
shifter in a conventional quadrature FM demodulator (for extremly low
modulation and narrow band PM detection)
I have entered practical values for all the elemnts of the crystal (q=20000)

I am attaching a netnames and when I netlist, I get a whole
bunch of ERROR_INVALID_PIN errors. Can someone tell me what is
going wrong ?
Thanks

I am trying to clean up my hard drive a bit and found a long-expired
version of protel dxp.
I cannot find an "unwise.exe" file in any of the directories. And when
I try to use the Windows "Add/Remove Program" feature, there is no

I'm still not happy with my spice models.  I ask this before and was
given this:
* CD4069UB  CMOS HEX INVERTER as amplifier
*connections  A(in) G(out) VDD VSS

I am after a spice model for a voltage to frequency converter.
Does anyone have one handy ?
I have checked some of the manufacturer pages, but none seem to exist !
For example :

Hi, all:
I couldn't find in the lib, is it in protel DXP 2004?  or I have to make
it by myself?
thanks

See....
Newsgroups: alt.binaries.schematics.electronic
Subject: Not Equal Math Symbol - NotEqual.jpg
Message-ID: <g3krb1le0ofmflgip23o5igkr9hcmnq009@4ax.com>

is there more any info on this ?
the LTSpice help just says PHIDET = behavoural type II phase detector, make
sure the inputs dont rise to sharply,
im not sure if its doing what I want, I was hoping to simulate the function

I currently have been using SWCAD3 for my simulation needs. I have a
demo version of Simetrix. Is it worth going through the effort to learn
Simetrix , or will SWCAD3 offer the same features/performance.
Cheers

Hello all :)
Does anyone here know how to add a custom component in eagle from cadsoft?
Thanks

HI, everyone. Can someone advise me (and the group) if there is a way to
avoid mistakes in schematic, which may appear if you write wrong off page
connector name or hierarchical pin/ports name? It is possible to create text
netlist, and ...comparing all the nets and schematic it is ...

Is there someone who know how I can move reference designator on the
silkscreen with Cadence/Allegro 15.1? I try to place them to see it
well on the PCB when parts will be there. I only find "Auto Silkscreen"
and the placement is not as good as I want (different orientation, non

Dear sci.electronics.cad groupies,
has anyone experience with EXPEDITION PCB and ViewDraw from Mentor? Can
you recommend it?
How much do either cost in the USA or elsewhere?

****************************************************************
Receive a FREE 20GB IPOD! as seen on BBC, CNN, NBC !!
Each person is entitled to a FREE 20GB IPOD at http://www.
freeipods.com/?r=19260535 ! No strings attached , it has been