Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering
ElectronicsKB.com
Contact UsLink To UsSearch & Site Map

Electronics Forum / Electronics / May 2007



Tip: Looking for answers? Try searching our database.

Shielding from microwaves

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
eric - 23 May 2007 20:36 GMT
Hi, I am having a little microwave experiment, and I want to shield some
 cracks from leaking microwaves. A pal said to me that a paper-type
called "mica" is used for such reasons in microwave ovens. Actually what
he told me is that it allows microwaves to pass through, but it blurs
them so as they are not focused as before.

Is it true, or does anyone know any better way to make leaking
microwaves less harmful (apart from Faraday cage, this is too hard for
me to make, I suppose).
Simon - 23 May 2007 20:53 GMT
> Hi, I am having a little microwave experiment, and I want to shield some
> cracks from leaking microwaves. A pal said to me that a paper-type called
[quoted text clipped - 5 lines]
> less harmful (apart from Faraday cage, this is too hard for me to make, I
> suppose).

If you don't need 100% attentuation of the microwaves, then it might be
quite easy to make a Faraday cage. I made one out of a biscuit tin and
chicken wire that works reasonably well at cellphone frequencies (up to
about 1800 MHz I think). Details are at:
http://www.sgurr.co.uk/lundycam/faradaycage.html
eric - 23 May 2007 21:20 GMT
>> Hi, I am having a little microwave experiment, and I want to shield some
>> cracks from leaking microwaves. A pal said to me that a paper-type called
[quoted text clipped - 11 lines]
> about 1800 MHz I think). Details are at:
> http://www.sgurr.co.uk/lundycam/faradaycage.html

Thanks for your reply. I would like to vanish them outside of the usage
area, if possible. I am not much in electronics, but is it a low budget
Faraday cage possible to seal an area of about 2 meter x 2 meter x 2
meter? What is this "chicken wire" that you are mentioning? Do you mean
ordinary wire?
Simon - 23 May 2007 21:44 GMT
>>> Hi, I am having a little microwave experiment, and I want to shield some
>>> cracks from leaking microwaves. A pal said to me that a paper-type
[quoted text clipped - 17 lines]
> meter? What is this "chicken wire" that you are mentioning? Do you mean
> ordinary wire?

By "chicken wire", I just mean wire mesh, made from galvanized steel wire.
The size of the holes in the mesh is important - it needs to be
significantly smaller than the shortest wavelengths you want to block. I
guess you could build a 2m x 2m x 2m Faraday cage out of chicken wire, but
the difficult bit would be probably be sealing the joints between the sheets
of chicken wire, and sealing around whatever kind of door or access hatches
you need.
eric - 23 May 2007 21:20 GMT
>> Hi, I am having a little microwave experiment, and I want to shield some
>> cracks from leaking microwaves. A pal said to me that a paper-type called
[quoted text clipped - 11 lines]
> about 1800 MHz I think). Details are at:
> http://www.sgurr.co.uk/lundycam/faradaycage.html

Thanks for your reply. I would like to vanish them outside of the usage
area, if possible. I am not much in electronics, but is it a low budget
faraday cage possible to seal an area of about 2 meter x 2 meter x 2
meter? What is this "chicken wire" that you are mentioning? Do you mean
ordinary wire?
eric - 25 May 2007 11:35 GMT
> Thanks for your reply. I would like to vanish them outside of the usage
> area, if possible. I am not much in electronics, but is it a low budget
> faraday cage possible to seal an area of about 2 meter x 2 meter x 2
> meter? What is this "chicken wire" that you are mentioning? Do you mean
> ordinary wire?

On the web I came across references to Velostat. Does anyone know if it
absorbs microwaves and where may one get it from?
Jasen - 24 May 2007 07:34 GMT
> Hi, I am having a little microwave experiment, and I want to shield some
>   cracks from leaking microwaves.

ideally: solder or weld the crack shut.
if that's too hard stuff the crack with aluminium foil.

A pal said to me that a paper-type called "mica" is used for such reasons in microwave ovens.

mica is used in the oven's I'm not sure exactly what puropse it
serves, it is not a tyype of paper,

> Is it true, or does anyone know any better way to make leaking
> microwaves less harmful (apart from Faraday cage, this is too hard for
> me to make, I suppose).

Signature

Bye.
  Jasen

eric - 24 May 2007 12:09 GMT
> A pal said to me that a paper-type called "mica" is used for such reasons in microwave ovens.
>
> mica is used in the oven's I'm not sure exactly what puropse it
> serves, it is not a tyype of paper,

Perhaps you may ask your friend about mica and shielding in general?
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2010 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.