 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering ElectronicsKB.com Contact UsLink To UsSearch & Site Map |
Electronics Forum / CAD / September 2005"PSPICE COM Wrapper Error has Occured"
I have gotten this error a number of times using the new OrCad version 10.5 (Actually, it is the rule rather than the exception). Usually after a few simulations of any given circuit (can be a very simple circuit), this error takes place. Generally, I must close everything, kill-off all of the pspice engines in memory and restart the application. This works, but within a few simulations, we return to the old problem. It appears that the PSPICE application cannot (for some strange reason) generate a circuit netlist from the open Capture application, hence the "look into the session log" dialog and finally upon closing everything, I get the "wrapper error" message. What's happening? >I have gotten this error a number of times using the new OrCad version >10.5 (Actually, it is the rule rather than the exception). Usually >after a few simulations of any given circuit (can be a very simple >circuit), this error takes place. Generally, I must close everything, > kill-off all of the pspice engines in memory Ehhh? What is this ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ? Are you trying to run multiple instances of PSpice? >and restart the >application. This works, but within a few simulations, we return to [quoted text clipped - 6 lines] > >What's happening? Charlie Edmondson... any bugs in 10.5? I haven't installed my copy yet... I always wait for a lull in work ;-) ...Jim Thompson | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice:(480)460-2350 | | | E-mail Address at Website Fax:(480)460-2142 | Brass Rat | | http://www.analog-innovations.com | 1962 | I love to cook with wine. Sometimes I even put it in the food. >>I have gotten this error a number of times using the new OrCad version >>10.5 (Actually, it is the rule rather than the exception). Usually [quoted text clipped - 21 lines] > > ...Jim Thompson Sorry Jim, Have been moving to Borrego for the last week, and finally got internet access yesterday afternoon. Just starting to catch up... The PSpice COM wrapper errors means he is having a problem with communications between the various components of the software. Typically, this can be a registry problem, or some other mysterious error in the operating system. The different parts can't find each other. One of those 'reinstall the software' types of problems... 8-) Charlie >>>I have gotten this error a number of times using the new OrCad version >>>10.5 (Actually, it is the rule rather than the exception). Usually [quoted text clipped - 32 lines] > >Charlie Charlie, I got this reply back from Reema Divatia in support... "The problem you have mentioned in your email regarding the simulation error is something that can be caused if the user has multiple versions on the system or he still has old version entries in the environment variables and registry. This happens only with Capture and not with PSpice Schematics." Is Nikhil on vacation or gone from the scene? Haven't heard from him in several weeks though my questions were addressed to him. I hope it's just vacation, he's a good man... of course, maybe that's why he might be gone ;-) ...Jim Thompson | James E.Thompson, P.E. | mens | | Analog Innovations, Inc. | et | | Analog/Mixed-Signal ASIC's and Discrete Systems | manus | | Phoenix, Arizona Voice:(480)460-2350 | | | E-mail Address at Website Fax:(480)460-2142 | Brass Rat | | http://www.analog-innovations.com | 1962 | I love to cook with wine. Sometimes I even put it in the food. >>>>I have gotten this error a number of times using the new OrCad version >>>>10.5 (Actually, it is the rule rather than the exception). Usually [quoted text clipped - 48 lines] > > ...Jim Thompson He should still be around, as I haven't heard of any changes over there. Might just be getting a little vacation time in! Charlie > >>>>I have gotten this error a number of times using the new OrCad version > >>>>10.5 (Actually, it is the rule rather than the exception). Usually [quoted text clipped - 52 lines] > > Charlie Thanks for the great feekback on Nik! He is indeed too valuable to lose much less let go on vacation! I have him on a special project and I promise to let him respond to this forum as his time permits. Feel free to contact me if you have any questions or concerns regarding the Cadence OrCAD product line. I appreciate your support. Manny Marcano President EMA Design Automation Jim Thompson wrote: > On 16 Sep 2005 21:24:47 -0700, "cstocci" <cstocci@mfire.com> wrote: > I have gotten this error a number of times using the new OrCad version > 10.5 (Actually, it is the rule rather than the exception). Usually [quoted text clipped - 22 lines] > ...Jim Thompson > Sorry Jim, Have been moving to Borrego for the last week, and finally got internet access yesterday afternoon. Just starting to catch up... The PSpice COM wrapper errors means he is having a problem with communications between the various components of the software. Typically, this can be a registry problem, or some other mysterious error in the operating system. The different parts can't find each other. One of those 'reinstall the software' types of problems... 8-) Charlie |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.