 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering ElectronicsKB.com Contact UsLink To UsSearch & Site Map |
Electronics Forum / Basics / March 2006Q: What connector is this?
Hello, I'm like to buy some of these; http://www.retro.dial.pipex.com/2pole.jpg That's the 2 pole version, but ideally I'd like single pole. It's 0.1" pitch by the way just incase the image is deceptive. I know the single pole versions exist since I've seen them on my travels. The connector is most commonly recognised as used inside PC cases for connecting things like the LEDs and speaker to the motherboard. Rapid is a no-go, Maplin too, RSs site crashes, Farnell probably have them somewhere among 13,000 results, eBay is a no-go. Thanks again, Aly :) > Hello, > [quoted text clipped - 8 lines] > Rapid is a no-go, Maplin too, RSs site crashes, Farnell probably have them > somewhere among 13,000 results, eBay is a no-go. I bought some 10-way ones from Farnell, IIRC. The 'official' crimp tool is very expensive but I managed with a cheap one I got for Molex connectors. I cut them down to make smaller ones; you might be able to make single ones, with care. Leon techie_alison schrieb: > I'm like to buy some of these; http://www.retro.dial.pipex.com/2pole.jpg Take a look at: http://www.Harwin.com M20-106 http://www.yamaichi.com UFS-01A-01 http://www.tyco.com AMPMODU4 No. 87456-9 Farnell.de No. 865746 FCI No. 65239 cheers Gunther > techie_alison schrieb: > > I'm like to buy some of these; http://www.retro.dial.pipex.com/2pole.jpg [quoted text clipped - 8 lines] > cheers > Gunther No, thank you :) That's brilliant info, especially the Farnell bit to find a direction. Determined to find the 1-way ones, I don't fancy chopping up dozens of them for use with a logic analyser. Thanks to Gunther and Leon, Aly > No, thank you :) That's brilliant info, especially the Farnell bit to find > a direction. Determined to find the 1-way ones, I don't fancy chopping up > dozens of them for use with a logic analyser. If you want nice sturdy leads, you might buy them already attached to wires from Pomona. http://www.pomonaelectronics.com/cgi-local/tundra.pl?abcd1234&mode=D&crumbs=PATC H&cat=25PIN&sort=sort_field >I'm like to buy some of these; http://www.retro.dial.pipex.com/2pole.jpg > >That's the 2 pole version, but ideally I'd like single pole. How about http://www.mouser.com/catalog/625/1045.pdf Looks like they do carry the single row single position type. Vito > >I'm like to buy some of these; http://www.retro.dial.pipex.com/2pole.jpg > > [quoted text clipped - 7 lines] > > Vito Hi Vito :) That's spot on, 1-way 0.1". Postage not on the cheap side though to the UK, about $40 or $14 will a 5 week lead time. Had this a while back with a USA company who wanted $60 to post a 19pin D-Type. Aly >>> I'm like to buy some of these; http://www.retro.dial.pipex.com/2pole.jpg >>> [quoted text clipped - 17 lines] > > Aly Arrow have the FCI 65039-036. Stock number 070258X. 1+ £0.7, 50+ £0.067 Looking in the 2003/4 Book. website www.arrowne.com Phone number 01279 626777 >>>> I'm like to buy some of these; >>>> http://www.retro.dial.pipex.com/2pole.jpg [quoted text clipped - 25 lines] > website www.arrowne.com > Phone number 01279 626777 misstyped, and forgot a 0 in the one of price. Arrow have the FCI 65039-036. Stock number 070258X. 1+ £0.07, 50+ £0.067 > > website www.arrowne.com > > Phone number 01279 626777 > > misstyped, and forgot a 0 in the one of price. > Arrow have the FCI 65039-036. Stock number 070258X. 1+ £0.07, 50+ £0.067 Was gonna say :) 70p for a 1-way. Checking out now .....sent them an email. Brill :) Aly > Hi Vito :) > [quoted text clipped - 3 lines] > Had this a while back with a USA company who wanted $60 to post a 19pin > D-Type. Just by a couple of the crimp tools and it'll make that shipping look like pocket change. Do people really pay $650.00 for a crimp tool? >>Hi Vito :) >> [quoted text clipped - 12 lines] > Just by a couple of the crimp tools and it'll make that shipping look > like pocket change. Do people really pay $650.00 for a crimp tool? In the aerospace and power industries, that and a lot more.... hmm I got me a crimp tool that can do two size terminals and it cost £20, and it works very well, very solid built to. From : http://www.rapidelectronics.co.uk Hehee :) > > Hi Vito :) > > [quoted text clipped - 8 lines] > Just by a couple of the crimp tools and it'll make that shipping look > like pocket change. Do people really pay $650.00 for a crimp tool? > hmm I got me a crimp tool that can do two size terminals and it cost £20, > and it works very well, very solid built to. > > From : http://www.rapidelectronics.co.uk > > Hehee :) I use one of those as well. 8-) Leon techie_alison scrobe on the papyrus: > Hello, > [quoted text clipped - 13 lines] > > Aly :) Hi Aly, I spent several days looking for just such a connector about a year ago. No luck, so I ended up buying enclosed crimp terminals from RS (233-0022 or 233-0033 depending on your wire diameter) and a length of 3mm adhesive lined heatshrink sleeving (RS:157-3789). It works a treat.  SignatureJohn B > Hi Aly, > [quoted text clipped - 5 lines] > -- > John B Hi John, Yeah, whizzed through here as a lightbulb moment earlier. Sounds like quite a good idea actually. Don't have to be quite so critical in keeping the solder perfect on the crimp either. Definitely going to look into that :) Thanks, Aly |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.