Hi,
I recently purchased a used tektronix 465 scope off eBay and when I
turn it on it makes a pretty loud noise. The best way I can describe
the noise is as a fairly loud grinding noise. I've worked with more
modern scopes in college and at work and they never made any audible
noise so I was wondering if this is normal for the tek 465 or not? I
hooked the scope to a signal source and it does seem to display the
waveform so at least the basic functionally is there, but the audible
sound is somewhat strange to me.
Thanks.
tom@waymouth.co.nz - 30 Nov 2005 06:37 GMT
Does it have an internal fan? maby a wire or something is touching the
fan. I think you should open it up and have a good look and listen.
joshc - 30 Nov 2005 13:02 GMT
> Does it have an internal fan? maby a wire or something is touching the
> fan. I think you should open it up and have a good look and listen.
LOL, that's a good point. It does sound like the fan hitting a wire.
I'll open it up this afternoon and have a look.
Thanks.
Tim Williams - 30 Nov 2005 17:24 GMT
> I recently purchased a used tektronix 465 scope off eBay and when I
> turn it on it makes a pretty loud noise. The best way I can describe
> the noise is as a fairly loud grinding noise.
Every so often my Tek 475 starts buzzing. I usually slap at the fan in the
rear, or just ignore it. If yours is chronically loud, you might want to
open it up and have a look-see.
Tim
--
Deep Fryer: a very philosophical monk.
Website: http://webpages.charter.net/dawill/tmoranwms
Rich Grise - 30 Nov 2005 19:31 GMT
> Hi,
>
[quoted text clipped - 6 lines]
> waveform so at least the basic functionally is there, but the audible
> sound is somewhat strange to me.
Check and see if the fan filter has been kicked in and is rubbing
against the blades.
Good Luck!
Rich