Icom 207

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Max - 26 Jul 2008 09:37 GMT

Hi Guys

I need a power block for one of these....

The orginal is 45w but would take something else.....

The manual says SC1318 it had been replaced with a SC1348...

Yes I can get one from the states but $US89 & freight makes it a little
too expensive for the moment.

Anyone, any help please.

Thanks

Max - zl2max

max at zl2max.gen.nz
** Posted from http://www.teranews.com **

Reply to this Message

Jasen Betts - 30 Jul 2008 12:25 GMT

> Hi Guys
>
[quoted text clipped - 14 lines]
>
> max at zl2max.gen.nz

Have you tried typing 13.8V into tradme's search tool?

if it'll survive 15V (or you're prepared to waste some power in a pair
of diodes) there's a bunch of cheap 15v laptop PSUs on there too.

Bye.
Jasen

Reply to this Message

Franc Zabkar - 30 Jul 2008 22:06 GMT

>Hi Guys
>
[quoted text clipped - 15 lines]
>max at zl2max.gen.nz
>** Posted from http://www.teranews.com **

I see that the SC1318 can be substituted with an M57788MR:

http://www.rfparts.com/module_icom.html
http://www.rfparts.com/module_m.html
http://www.rfparts.com/pdf_docs/57704-68776/57788mr.pdf

FWIW, the M57788MR appears to have been used in many Kenwood models:
http://www.kenwood.co.jp/j/products/amateur/kouji/fmcar.html

... and in some Yaesu models (eg FT-90R).

Try Kenwood service or Dick Smith Spares (former Yaesu agents).

spares at dse dot com dot au
http://au.kenwood.com/Company/

- Franc Zabkar

Signature

Please remove one 'i' from my address when replying by email.

Reply to this Message

Electronics Forum / Electronics / July 2008

Icom 207