 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion GroupsElectronicsBasicsRepairDesignCADComponentsEquipmentElectrical Engineering ElectronicsKB.com Contact UsLink To UsSearch & Site Map |
Electronics Forum / Electronics / July 2007HV Cap NEEDED for TV!
Anyone... I am looking for a 103J 2.0KV Cap (Blue - from near the flyback transformer) for my TV. I have let the popcorn-smoke out of mine and can't find any quick drop in places to pick one up. There are a few component places who have them mail order but I need to have a minimum order $$$$ and high shipping costs just for one component... At this stage I am scouring the hard rubbish collections for dead TV's and taking a hammer to them to see if there are any inside. If anyone has any suggestions or has this 50cent component laying around I'll happily chuck a couple of bucks for postage to save me the trouble of my smash and grab approach. Thanx. Chris > Anyone... > [quoted text clipped - 14 lines] > > Chris Almost all TV repairers would stock, and sell you one over the counter at a reasonable cost, failing that WES components stock both 2kV & 6kV from memory (which is where almost all TV repairers would have got them from in the first place)....but if you don't want to pay more for postage than the component cost that option is out. James > Almost all TV repairers would stock, and sell you one over the counter at a > reasonable cost, failing that WES components stock both 2kV & 6kV from [quoted text clipped - 3 lines] > > James I rang a few TV repair places and asked for the caps.... The gave me the runaround and said that I should bring the TV into them. They wouldn't make any money just selling me a couple of caps. They want the $60+ labour charge to do 2 minutes of soldering. I have had good response to my plight and I thank to people who have helped me out.... Chris. >> Almost all TV repairers would stock, and sell you one over the counter at >> a reasonable cost, failing that WES components stock both 2kV & 6kV from [quoted text clipped - 13 lines] > > Chris. Good to hear you got what you were after. On the flip side the repairers you called obviously aren't trying to win more work. More often than not a person will return to a place where they have recieved a helpful repsonse previously. James >> I rang a few TV repair places and asked for the caps.... The gave me the >> runaround and said that I should bring the TV into them. They wouldn't >> make any money just selling me a couple of caps. They want the $60+ >> labour charge to do 2 minutes of soldering. 1. Liability. If you kill yourself installing this cap, they may be liable. 2. Repair does not consist of just changing the cap. I, for example, would check the TV and fix any common problem your particular chassis may have, preventing failure of something else in the near future. If fix the TV, no matter how simple problem is, I have to give warranty. Hence is the charge. Thsi is common -- TV repaireres will not normally sell parts. It is not their business. And as for returning customer -- I will not want to fix a TV for someone who tried to fix it himself (no offence, James). Or wil fix it at extra charge. Few reasons for it and it is not because I just want to punish the customer. Mainly because it is virtually guaranteed I will spend more time on it. Rudolf > >> I rang a few TV repair places and asked for the caps.... The gave me the > >> runaround and said that I should bring the TV into them. They wouldn't [quoted text clipped - 15 lines] > > Rudolf Fixing something that (especially a non-professional) has "had a go with" is a nightmare. If parts have been changed, it might not be possible to determine if they have been replaced with the same values, and if you can't see or test the original part, it can be much harder to determine the original fault(s), or what caused them in the first place. Bodgy testing or component replacement can even create more faults. The other reason that they wouldnt want to sell components, is, you replace a part without replacing whatever made it fail in the first place, it fails again, the customer is likely to take it back to the TV repair shop and expect some sort of warranty. This could be a quite expensive exercise for something like a horizontal output transistor that is replaced without replacing faulty HT cap, eht transformer etc that caused it to fail, and will make it fail again. > The other reason that they wouldnt want to sell components, is, you > replace a part without replacing whatever made it fail in the first [quoted text clipped - 3 lines] > transistor that is replaced without replacing faulty HT cap, eht > transformer etc that caused it to fail, and will make it fail again. It's not a problem for DSE, Jaycar etc. They simply refuse to replace used semiconductors. You can test it before soldering if you have the appropriate test equipment. MrT. >>> I rang a few TV repair places and asked for the caps.... The gave me the >>> runaround and said that I should bring the TV into them. They wouldn't >>> make any money just selling me a couple of caps. They want the $60+ >>> labour charge to do 2 minutes of soldering. > >1. Liability. If you kill yourself installing this cap, they may be liable. Come on, that's absurd. - Franc Zabkar  SignaturePlease remove one 'i' from my address when replying by email. >>1. Liability. If you kill yourself installing this cap, they may be >>liable. > > Come on, that's absurd. > > - Franc Zabkar Do you want to take a risk? I will not. Rudolf |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.